iPower Grow Light 1000W Super HPS/MH Dimmable Grow Light Sets
Air Cooled Reflector
Cooled Tube Reflector
|
|
Pros: - Best coverage. - No refraction of light on the glass. Normally 6% to 9% lumens will be lost due to the glass interface. Cons: - Temperature cannot be controlled |
DETAILS & SPECIFICATIONS
19” Aluminum Wing Reflector w/ Ceramic Socket
- High quality aluminum panels
- Flexible reflector for angles up to 180 degrees
- Imprinted convex surface for better light distribution
- Built-in 15' heavy duty lamp cord with ceramic mogul socket
- Standard hydroponics S-plug
- Versatile and flexible to install
- Ideal for small areas with temperature control
- Light can be hung in vertical or horizontal positions
- Dimensions (L x W): 18.5” x 18.5”
- Socket material: ceramic
- Socket type: mogul (E39)
- Heavy duty 15’ lamp cord (UL Listed)
- Standard Hydroponics S-Plug
- Passive Air Cooled
- Pre-installed lamp socket
- Precise 4'x4' of light coverage*
*Coverage depends on fixture height and wattage; results may vary
6" Cooltube reflector w/ add-on wing 24" long
- High quality aluminum panels
- Steel flanges for durability
- 1/8" thick tempered glass
- Built-in 15' heavy duty lamp cord with ceramic mogul socket (UL Listed)
- Fan, filter and duct supported
- Ideal for small areas with inline fan installed
- Light can be hung in vertical or horizontal positions
- Weight (lbs): 8
- Dimensions (D x L): 6" X 24"
- Maximum wattage: 1000W
- Internal and external (wing) reflectors included
- Socket: mogul (E39)
- Socket material: ceramic
- Pre-installed lamp socket
- Precise 4'x4' of light coverage*
*Coverage depends on fixture height and wattage; results may vary
- High quality aluminum panels
- Steel flanges for durability
- 1/8" thick tempered glass
- Built-in 15' heavy duty lamp cord with ceramic mogul socket (UL Listed)
- Fan, filter and duct supported
- Ideal for large areas with inline fan installed
- Light can be hung in vertical or horizontal positions
- Weight (lbs): 12
- Flange Diameter: 6"
- Dimensions (L x W x H): 29" X 26" X 8"
- Maximum wattage: 1000W
- Internal and external (wing) reflectors included
- Socket: mogul (E39)
- Socket material: ceramic
- Pre-installed lamp socket
- Install Space Requirement (L x W x H): 21.25” x 18.5 “ x 4.75”
- Large 5'x5' of light coverage*
*Coverage depends on fixture height and wattage; results may vary
- High quality aluminum panels
- Steel flanges for durability
- 1/8" thick tempered glass
- Built-in 15' heavy duty lamp cord with ceramic mogul socket (UL Listed)
- Fan, filter and duct supported
- Ideal for large areas with inline fan installed
- Light can be hung in vertical or horizontal positions
- Weight (lbs): 16
- Flange Diameter: 6"
- Dimensions (L x W x H): 36" X 32" X 10"
- Maximum wattage: 1000W
- Internal and external (wing) reflectors included
- Socket: mogul (E39)
- Socket material: ceramic
- Pre-installed lamp socket
- Large 6'x6' of light coverage*
*Coverage depends on fixture height and wattage; results may vary
- High quality aluminum panels
- Steel flanges for durability
- 1/8" thick tempered glass
- Built-in 15' heavy duty lamp cord with ceramic mogul socket (UL Listed)
- Fan, filter and duct supported
- Removable slide-in glass;
- Sealing gaskets between glass and metal; ideal for inline fan installs
- Hanger V-hooks included
- Light can be hung in vertical or horizontal positions
- Weight (lbs): 15
- Flange Diameter: 6"
- Dimensions (L x W x H): 23" X 17" x 9"
- Maximum wattage: 1000W
- Internal and external (wing) reflectors included
- Socket: mogul (E39)
- Socket material: ceramic
- Pre-installed lamp socket
- Precise 4'x4' of light coverage*
*Coverage depends on fixture height and wattage; results may vary
- Conveniently wired with standard hydroponic "S" plug
- Operating Voltage Range: 100V ~ 265V.
- Anodized aluminum fins for maximized heat dissipation
- Fully compatible with HPS & MH bulbs
- Dimming power settings: 50% (half power), 75%, and 100% (full power)
- Zero acoustic resonance
- Operating Temperature: -40*C ~ 65*C.
- Power Supply Frequency: 47 ~ 63 Hz
- Operating Frequency: 25 ~ 100 kHz
- Power Factor: > 0.97
- Total Harmonic Distortion (THD): < 10%
- Crest Factor: < 1.7
- Open & Short Circuit Protection
- Ignition Failure Protection
- Overheating Protection
- End-of-Bulb-Life Protection
- Internal Resin coating for long life
- UL Listed
*ballast color & shape may vary, 250w model is not dimmable
- Compatible with magnetic and digital ballasts
- Can be used indoors or outdoors
- Does not lure insects
- Thick glass housing for extra durability
- Enhanced wavelengths and lumen power
- Weight (lbs): 0.4
- Base type: Mogul E39
- Color temperature (K): 2,100(HPS) 6000(MH)
- Initial Lumen(lm): 140,000(HPS) 92,000(MH)
- Expected Life Span(Hr): 24,000~ 32,000(HPS) 10,000~15,000(MH)
- Frequency (Hz): 60
- Ideal for blooming and flowering
- Raise and lower light fixture in one simple movement.
- Locking mechanism
- 1/8” rope that supports up to 75 lbs of tension (150 lbs total)
- High quality stainless steel latches
- Compatible with all parabolic and round reflectors, as long as hooks and locking latch suit.
- 1/8” polypropylene rope
- Maximum extension length: 6’
- Stainless steel latches
- One Locking Latch for hanging the reflector, the other one to connect the hanger to the ceiling
- Up to 150 lbs / 68 kg weight load capacity per pair
- Always anchor free end of rope in the unlikely event of mechanical failure.
- Perfect for hanging reflectors, light fixtures, carbon filters and ventilation equipment
INTERNATIONAL ORDERS
- All orders are still covered by HPS Grow Lights' 30-day Money Back Guarantee
- Shipping and customs charges for non-US orders will be calculated when the item is added to cart
