Inkbird Digital CO2 Controller Carbon Dioxide Monitor IAQ Monitor with Sensitive NDIR CO2 Sensor
and Plug-n-Play Design for Ventilation System, Building Control and HVAC Equipment,Greenhouse,
Exhaust Fan, Grow Tents.
NOTE:
WORK1: The CO2 regulator or generator;
WORK2: The exhaust fan.
Output Power: 100~120Vac 50/60Hz 10A MAX
Main Features of ICC-500T CO2 controller with S01 sensor:
● Plug and play, simple operation.
● Dual relays are able to connect with the CO2 regulator or generator and the exhaust fan simultaneously.
● Dual readouts display the current measured CO2 concentration and the set CO2 concentration simultaneously.
● CO2 calibration.
● Programmable high/low CO2 concentration alarm.
● Widely applied in the ventilation system, building control and HVAC equipment.
Specifications of ICC-500T CO₂ Controller
- Input Power: 100~240Vac 50/60Hz 10A MAX
- Output Power: 100~240Vac 50/60Hz 10A MAX (two sockets)
- Disconnection Method: Type 1B
- Pollution Degree: 2
- Rated Impulse Voltage: 1500V
- Automatic Operation: 6000 cycles
- Ambient temperature:
- Working Environment: room temperature
- Storage Temperature: 0℃~60℃/32℉~140℉
- Storage Humidity: 20~80%RH (No freezing or condensation)
Package Content: 1x CO2 Controller + 1x S01 Sensor + 1x English Manual
1.Plug the CO₂ Controller and the sensor
When the CO₂ sensor is inserted, the controller will take about 8 seconds to identify. Then the PV window will display
8888 and blink, the SV window will display the CO₂ concentration setting.
2.Waiting for about 120 seconds
After 120 seconds, CO₂ module works stably, and the PV window stops blinking and displays the measured CO₂
concentration. Within 120 seconds, the buttons cannot be operated , the indicators of WORK1 and WORK2 are off,
and the WORK1 and WORK2 have no output
3.Plug your devices into the socket of ICC-500T
The controller will automatically identify and convert the CO₂ regulator or generator and the exhaust fan.
WORK1 is theoutput of the CO₂ regulator or generator, and the WORK1 indicator is the WORK1 output status indicator.
WORK2 is the output of the exhaust fan, and the WORK2 indicator is the WORK2 output status indicator.
WORK1 Only for the CO₂ regulator or generator, WORK2 Only for the exhaust fan.
4. Follow the instructions to finish the setting
There are three modes can be set, for more information about setting, please refer to the user manual on the listing page.
【Multiple Uses】
The Inkbird carbon dioxide controller is widely applied in the ventilation system, building control and HVAC equipment,
such as schools, office buildings, factories, hotels, hospitals and anywhere that high levels of carbon dioxide are generated.
On May 9, 2025 at 00:40:10 PDT, seller added the following information: