20T Hydraulic Cylinder Sleeve Liner Puller Tool For Truck Tractor or Automotive
Description
Description:
This Cylinder Liner Puller Is Made of #45 Steel Which Has Good Corrosion and Wear Resistance, so It Is More Durable and Can Be Used for a Long Time. Compared with the Traditional One, This Cylinder Liner Puller Is Ergonomically Designed with a Press Rod, Which Is More Labor-saving and Facilitates Your Use During Operation.
Details:
#45 Steel Material: This Cylinder Liner Puller Is Made of #45 Steel Which Has Good Corrosion and Wear Resistance, so It Is More Durable and Can Be Used for a Long Time.
Adjustable Cylinder Diameter: There Is a Screw at the Bottom of the Cylinder Liner Puller Used to Adjust the Cylinder Diameter, so You Can Adjust It According to Your Own Needs.
How to Use:
1. According to the Model You Need to Disassemble, Choose the Pull Plate and Connecting Rod (the Connecting Rod Is Divided into Two Lengths).
2. Connect the Connecting Rod with the Cylinder Lifter, the Steering Knuckle and the Pull Plate.
3. Twist the Steering Knuckle of the Cylinder Puller to a Right Angle with the Connecting Rod. the Straight Side of the Pull Plate Is Parallel to the Connecting Rod and Passes Through the Cylinder Liner so That the Small Diameter of the Pull Plate Is Locked into the Inner Diameter of the Cylinder Liner.
4. Sleeve the Two Support Tubes Onto the Diagonal Cylinder Head Screws.
5. Pass the Beam of the Cylinder Puller into the Slideway of the Lifting Gear, and Put Both Ends of the Beam into the Groove of the Support Tube.
6. Screw the Hydraulic Assembly into the Lifting Gear (Pay Attention to the Center Hole on the Beam) and Tighten It.
7. Check Whether the Pull Plate, Beam and Support Tube Are Accurately Positioned.
8. Transport the Small Plug of the Hydraulic Assembly with a Pressure Rod, and the Cylinder Sleeve Can Be Pulled out Smoothly.
Specification:
Product: Cylinder Puller
Max. Pulling Force: 20ton
Material: #45 Steel
Maximum Stroke (Piston Push Rod): 5cm/1.97in
Weight: 16.85KG
Suitable for: Inner Diameter Between 80-140mm.
This Cylinder Liner Puller Is Made of #45 Steel Which Has Good Corrosion and Wear Resistance, so It Is More Durable and Can Be Used for a Long Time. Compared with the Traditional One, This Cylinder Liner Puller Is Ergonomically Designed with a Press Rod, Which Is More Labor-saving and Facilitates Your Use During Operation.
Details:
#45 Steel Material: This Cylinder Liner Puller Is Made of #45 Steel Which Has Good Corrosion and Wear Resistance, so It Is More Durable and Can Be Used for a Long Time.
Adjustable Cylinder Diameter: There Is a Screw at the Bottom of the Cylinder Liner Puller Used to Adjust the Cylinder Diameter, so You Can Adjust It According to Your Own Needs.
How to Use:
1. According to the Model You Need to Disassemble, Choose the Pull Plate and Connecting Rod (the Connecting Rod Is Divided into Two Lengths).
2. Connect the Connecting Rod with the Cylinder Lifter, the Steering Knuckle and the Pull Plate.
3. Twist the Steering Knuckle of the Cylinder Puller to a Right Angle with the Connecting Rod. the Straight Side of the Pull Plate Is Parallel to the Connecting Rod and Passes Through the Cylinder Liner so That the Small Diameter of the Pull Plate Is Locked into the Inner Diameter of the Cylinder Liner.
4. Sleeve the Two Support Tubes Onto the Diagonal Cylinder Head Screws.
5. Pass the Beam of the Cylinder Puller into the Slideway of the Lifting Gear, and Put Both Ends of the Beam into the Groove of the Support Tube.
6. Screw the Hydraulic Assembly into the Lifting Gear (Pay Attention to the Center Hole on the Beam) and Tighten It.
7. Check Whether the Pull Plate, Beam and Support Tube Are Accurately Positioned.
8. Transport the Small Plug of the Hydraulic Assembly with a Pressure Rod, and the Cylinder Sleeve Can Be Pulled out Smoothly.
Specification:
Product: Cylinder Puller
Max. Pulling Force: 20ton
Material: #45 Steel
Maximum Stroke (Piston Push Rod): 5cm/1.97in
Weight: 16.85KG
Suitable for: Inner Diameter Between 80-140mm.
Package includes
Package Included:
1* Cylinder Puller
Other Accessories for Use
1* Cylinder Puller
Other Accessories for Use
Product Highlights
Key Features:
|High Durability: This Cylinder Liner Puller Is Made of #45 Steel Which Has Good Corrosion and Wear Resistance, so It Is More Durable and Can Be Used for a Long Time.
|Ergonomically Designed: Compared with the Traditional One, This Cylinder Liner Puller Is Ergonomically Designed with a Press Rod, Which Is More Labor-saving and Facilitates Your Use During Operation.
|High Efficiency: It Has a Maximum Pulling Force of 20t, Even the Ultra-thin Wall Can Also Be Easily Pulled out.
|High Compatability: This Cylinder Liner Puller Is Suitable for Any Model with the Inner Diameter of the Cylinder Liner Between 80-140mm. Meanwhile, Both Dry and Wet Types Can Be Used.
|Wide Application: This Cylinder Liner Puller Is Used for the Disassembly of the Internal Combustion Engine and Cylinder Liner. It Is Suitable for Any Model with the Inner Diameter of the Cylinder Liner Between 80-140mm.
|High Durability: This Cylinder Liner Puller Is Made of #45 Steel Which Has Good Corrosion and Wear Resistance, so It Is More Durable and Can Be Used for a Long Time.
|Ergonomically Designed: Compared with the Traditional One, This Cylinder Liner Puller Is Ergonomically Designed with a Press Rod, Which Is More Labor-saving and Facilitates Your Use During Operation.
|High Efficiency: It Has a Maximum Pulling Force of 20t, Even the Ultra-thin Wall Can Also Be Easily Pulled out.
|High Compatability: This Cylinder Liner Puller Is Suitable for Any Model with the Inner Diameter of the Cylinder Liner Between 80-140mm. Meanwhile, Both Dry and Wet Types Can Be Used.
|Wide Application: This Cylinder Liner Puller Is Used for the Disassembly of the Internal Combustion Engine and Cylinder Liner. It Is Suitable for Any Model with the Inner Diameter of the Cylinder Liner Between 80-140mm.
2. We only accept payment via Paypal. Please kindly check if you can do the payment via PayPal before placing an order,Payment must be received within 7 days after order is made.
Delivery details
1. We are not responsible for undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address.
2. Items are generally shipped out the next business day after your payment has been cleared (Sat. & Sun. excluded.)
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-7 working days to:USA
4-10 working days to:Canada
it may take a bit longer time, due to local dispatches ,
Customs checking, High Season period, eg. x'mas or other reasons. Your patience is always appreciated
2-7 working days to: USA
4-10 working days to: Canada
12-20 working days to: Other countries
2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part.
3. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item.
Feedback
specialized in manufacturing and selling Camera equipment, camera materials and specialty products. We are always working according to international standards and serve our customers from all over the world. Taking the purpose of "meeting different requirements from our overseas customers",
.Your comments about our products are welcomed. We hope to have the opportunity to establish business relationships with you. Our goal is "providing you both high quality products and the best prices".
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you , immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
2, please with ebay message if we made a deal on ebay. E-mail is often filtered as spam.
3, Please wait for our reply to your email, we will do our best to help you solve the problem.
Specification:
Product: Cylinder Puller
Max. Pulling Force: 20ton
Material: #45 Steel
Maximum Stroke (Piston Push Rod): 5cm/1.97in
Weight: 16.85KG
Suitable for: Inner Diameter Between 80-140mm.
Product: Cylinder Puller
Max. Pulling Force: 20ton
Material: #45 Steel
Maximum Stroke (Piston Push Rod): 5cm/1.97in
Weight: 16.85KG
Suitable for: Inner Diameter Between 80-140mm.