HUD OBD2+GPS Car Head Up Digital Display Speedometer KM/H MPH Overspeed Alarm

$32.99
Type
HUD
Working Temperature
-40°C - +80 °C
Relative Humidity
10%-95%
Working Voltage
11V ~18Vdc (12Vdc/200mA)
Standby Current
<20mA
Brand
LeeKooLuu
Barometric Pressure
86-106KPa
Voice Environment
<60dB
Dual System
GPS+OBD
condition
New
HUD OBD2+GPS Car Head Up Digital Display Speedometer KM/H MPH Overspeed Alarm
Description
Description:
1.OBD Multifunctional LCD: This product reads the driving data of the vehicle through the OBD2 platform of the car ECU computer, such as speed, RPM, fuel consumption, water temperature, and voltage, etc. Instantly read the driving information to prevent the driver from looking down at the instrument panel during transportation and affecting safety. This product does not rewrite any data in the ECU.
2.Multi-Function Display: Display rich data features, such as Driving speed, RPM, Water temperature, Voltage, Clock, Altitude, Driving time, Driving distance, Driving direction, Fuel consumption, Customize navigation, Mobile device interconnection, Navigation arrow direction, Satellite numbers, Turbine pressure, Air-fuel ratio, Longitude and latitude, Dynamic test, Oil temperature, Intake pressure, KM/H&MPH, Datastream, etc.
3.OBD + GPS Dual System: OBD + GPS dual system design, compatible with almost 100% of cars.OBD2 mode is only applicable to most vehicles manufactured after 2008(if you want to use OBD2 mode, please check whether your vehicle has OBD2 protocol or contact us for confirmation before purchase). The GPS mode is perfect for 100% of vehicles. (if your car is not OBD compatible, use GPS mode.)Dual System, Change free.
4.Easy to Install and Use: Plug and play, easy to Install. This unit has equipped with 2 cables: OBD2 and USB cable, just plug it into the OBD or GPS interface to use and read your car's data. Three installation methods: make the bracket attaches to the front windshield, make the bracket attaches to the center console of the car, or use the tape on the bottom of the speedometer to paste the speedometer on the center console. The bracket attaches can be rotated 360°, which is very convenient to use.
5.High Quality: Superior quality. The chip with powerful performance and compatibility to make sure dual system, dual-run memory, and dual-core processor high-speed operate.

Specification:
Type: HUD
Dual System: GPS+OBD
Working Temperature:  -40 °C - + 80 °C
Barometric Pressure: 86-106KPa
Relative Humidity: 10%-95%
Voice Environment:  <60dB
Working Voltage: 11V ~18Vdc (12Vdc/200mA)
Standby Current : <20mA

Included:
1x Car Head-Up Display
1x USB Cable
1x OBD Cable
1x Base Bracket
1x Rotating Suction Cup Bracket
1x English User Manual1
1. Only accept PayPal. 2. All major credit cards are accepted through our secure PayPal payment system. 3. We ship to your PayPal address. Please make sure your paypal address is correct before paying.
Please make sure your eBay shipping address is correct for your receipt.
We will try our best to resolve any dispute and do our best to please you. If you are not satisfied with our product, please contact first. We happily accept returns and give a full refund (minus shipping) on any item. The item must be returned in its original condition with the hygiene and health seal intact. If you haven't received it within the delivery time, please feel free to contact us. We will check it for you with the post office and customs. Because sometimes it is delayed by traffic or flight jams. Please don't open a dispute to us. We will take responsibility for reshipping or refunding lost items.
Please contact us in good time if you have any questions under any circumstances. We look forward to your positive feedback and we will do the same for you. We care about our valued customers and will always do our best to help you in case you have any problems. Working time: GMT 8/9: 00-18: 30 Usually we will reply you within one working day.
DataCaciques