Honda V65 84-85 VF1100S Sabre Small Fuel Petcock Repair Kit With Drill & Tap. Comes with 1 new seal, 2 screws, 1 ea. correct size tap drill and tap 3mm x 0.5. This is a kit, you will only need to complete the repair, you will not need to purchase tools etc. This kit is for the fuel valve under the RH side cover only of the V65 Sabre, other locations on other models. NOTE: The valves pictured are not included, it is just the items listed above. This kits will replace the seal in OEM Honda P/N 16950-MB1-005 Petcock assemblies.
I have confirmed this kit will fit the Honda valve p/n 16950-KE7-015, but it will only repair the on-off valve. Fits Honda 84-85 VF500F Interceptor. NOTE: I have sold many for this model bike (VF500F) and it was confirmed many times, but found 1 customer that it didn't fit, not sure why, so please do some measuring before you purchase or email me a photo etc. Thanks
This kit will also fit the other models, please check my compatibility listings. I have verified the models listed below.
NOTE: I have included a picture of my CAD drawing so all the dimensions are listed. You can use these dimensions, in millimeters, to see if this seal will fit your model etc.
I have reversed engineered these new seals and had them made to be exact replacement parts for the Honda petcocks. 1 photo of what is common after all these years. They are not from a different motorcycle make or model that "should fit". I have measured at least 12 old seals and came up with accurate dimensions. I then made a CAD drawing to have a mold made and the parts produced.
I will also be offering these kits for the V65 VF1100C Magna, which has only 1 valve, OEM Honda P/N 16950-MB4-015, which is the same as the Sabre tank valve, as well as a listing for just the smaller valve under the RH side cover of the VF1100S Sabre.
If you think this will fit other models, please give me the dimensions of your old one and I can check for you.
Note: This is not a difficult repair, but does require some skill to make sure the holes are drilled straight and tapped straight. The metal of these valves is VERY soft, so care must be taken.
Part # = 16950-MB1-005
Part Description = PETCOCK ASSEMBLY
Model Count = 7
VF1100S-E 1984 1100 V65 Sabre Street
VF1100S-F 1985 1100 V65 Sabre Street
VF500C-E 1984 500 V30 Magna Street
VF500C-F 1985 500 V30 Magna Street
VF700C-E 1984 700 VF700C Magna Street
VF750C-C 1982 750 VF750C V45 Magna Street
VF750C-D 1983 750 VF750C V45 Magna Street
Part Description = PETCOCK ASSEMBLY, AUTO - (replaces 16950-KE7-015)
Model Count = 2
VF500F-E 1984 500 Interceptor 500 Street
VF500F-F 1985 500 Interceptor 500 Street