Honda S2000 Trunk Boot Luggage Rack ; No Clamps = No Damage

Revo-Rack is a unique design of Luggage Rack, only manufactured by us.

It eliminates the risk of paint damage, caused by steel clamps or straps on the boot/trunk lid edge/surface. Revo-Rack can be fitted in under a minute without any tools. Please watch the video's below.

Revo-Rack has been extensively tested by TUV Italy to ensure its safe. It underwent force tests, speed tests and braking tests - It passed all of the these. The only convertible luggage rack globally that has been tested in this way. Tested to ISO/PAS 11154:2006 Road vehicles - Roof load carriers & European Directive for the General Safety 2002/95/CE

With the Revo-Rack luggage rack no metal touches your Honda only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your S2000's boot/trunk lid. This model is hand polished then anodised for a deep luster. We also make the rack in a black finish.

Why a Revo-Rack Luggage Rack ?

• Fits in 90 seconds no tools required, no fiddly brackets or bolts.
• Often fitting a conventional rack without damaging the fragile boot edge or surface is almost impossible, there is literally no space for a clamp or strap.
• Lightweight aluminium & magnesium frame weighs 1.7kg will never rust
• No straps or clamps on the boot surface/edge to mark and damage paint
• Revo-Racks load carrying capacity has been rated at 20kg 
• Supplied with two luggage straps and storage bag
• Made by the boot-bag group
• Signed for delivery by DHL with a 1 hour delivery slot
• Despatched next working day on a next day service if ordered before 3pm i.e. order Monday at 3 receive Wednesday.

The Rack Frame :

This luggage rack is manufactured from 25mm/ 1" T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency. The rack measures 900x420mm / 36"x17"

The Vacuum Cup Supports :

Revo-Rack attaches to your Honda using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.

The vacuum cup technology that Revo-Rack uses has existed for over 40 years it was developed in the film industry in the late 1960's to hold film camera's to cars, and is still in use today. 

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. These are not suction cups that produce a vacuum as they pull away from the surface. Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot lid, distortion is reduced, allowing the cup to be used with very little risk of damage.

Lifting on the release tabs near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. 

Revo-racks design is protected by UK, EU and North American Patents.