Before purchasing, please review all the pictures and ensure you are ordering the correct code and groove pattern.
Do not buy this key if your key is a single groove. As shown in the picture on the right, one groove was milled on each key side.
The listing is for one (1) OEM Honda double groove, flat back, non-ward cut pre-cut key, not two keys.
- The first picture is only a sample picture of the key head you will receive.
- Your key may look different than the sample picture, but it will still be a double groove on one side and flat on the other, non-ward cut (not notched)
Note: Honda made three versions of the "H" code series keys. In other words, any given H code, for example, H1012, came in a single groove, double groove and a double groove notched, so even though you choose the correct key code that your lock uses, that doesn't mean the key will work in your lock. It must also be the correct groove pattern, or the key won't slide in the hole...If you currently don't have a key, it's hard to tell which groove pattern your lock uses.
If you currently don't have a key, it's very hard to tell which groove pattern your ignition or lock uses.
The keys are new but may have oxidation. Have been in storage for many years.
Places to look for your bike's key code:
- On your original key.
- Stamped on the face of your ignition switch or lock.
For various small displacement Honda motorcycles from 1962 to1974. Honda models that may have used an H series key.
C50 C65 C70 C90 C100 C102 C105T C110 C200 C201
CA100 CA102 CA110 CA15T CA200
CB92 CB100 CB125
CD50 CD65 CD70 CD125
CL90 CL100 CL125
CM70 CM90 CM91
CS65 CS90 CS92
CT70 CT90 CT200
QA50
S65 S90
SL70 SL90 SL100 SL125
ST90
XL100 XL125
Z50