WHAT IS THE BMSimulator
The BMSimulator is an Engine Simulator used to alternativly test Honda/Acura OBD1 ecu's on the bench. It supplies the signals of the distributor (rpm signals) and many sensors so that an ECU can be fooled into thinking it has a functioning, running engine connected when it is safely on the bench.
Note:
The BMSimulator cannot simulate IACV (idle air control valve) behavior well enough to avoid the Code14. The IACV Code14 can be disabled in your favorite tuning software on your original baserom (.bin)
Alternative method to disable some errors codes:
Download Tool to Disable Codes HERE
REQUIREMENT:
-2.1mm Power supply between 12-17v not included.
-OBD1 Engine Harness not included.
The BMSimulator has terminal block connections suitable for building a harness easily.
Simulator Power Supply:
The BMSimulator is supplied without a power supply, it has a center-positive 2.1mm barrel jack for power.
Suitable adapters should be between 12-17v DC output with a minimal of ~700mA current.
Simulator Wire Harness:
The BMSimulator is supplied without the harness, you must construct your own. You will need a set of OBD1 ecu connectors plugs from a 92-95 Honda Civic, Accord, Prelude, etc (you can use the plugs from a OBD1 conversion harness).WHATS INCLUDED IN THE PACKAGE
- 1x BMSimulator (Honda/Acura OBD1 Engine Simulator)
SPECIFICATIONS AND CAPABILITIES
- TPS Sensor ~(0-101%)
- ECT Sensor ~(-6°C to 140°C) (21°F to 284°F)
- IAT Sensor ~(-9°C to 140°C) (16°F to 284°F)
- Map Sensor Voltage ~(Range from 0.00V to 4.96V)
- VSS Sensor ~(0km/h to 251km/h) (0mph to 156mph)
- RPM Simulation ~(28rpm 'engine stopped' to 12019rpm)
- O2 Sensor Voltage ~(Range from 0.00V to 4.96V)
- ELD Voltage ~(Range from 0.00V to 4.96V)
- Vtec Pressure Switch (VTP) On/Off
- Service Check Connector (SCS) On/Off
- Starter Signal (STS) On/Off
- Power Steering Pressure Switch (PSPS) On/Off
- AC Switch (ACS) On/Off
- Alternative Power Supply Inputs Pins
- Circuit Protection (Auto-Resetable PTC Fuse) set at 16V - 1A
- Injectors 1,2,3,4 Firing Leds
- Ignition Control Module (ICM) Sparks Firing Led
- Malfunction Indicator Light (MIL) Led
- Vtec Sensor Active (VTS) Led
- O2 Sensor Heater Active (O2H) Led
- Fuel Pump/Main Relay Active (FPMP) Led
- IACV Sensor Active Led
- EGR Sensor Active (EGR) Led
- Fan Control Active (FANC) Led
- AC Control Active (ACC) Led
- Alternator Control Active (ALTC) Led
- A17 Active Led
- Purge Control Active (PURGE) Led
- AC Switch Active (ACS) Led
- Power Steering Pressure Switch Active (PSPS) Led
- Starter Signal Active (STS) Led
- VSS Pulse Rate Led
- CYP Pulse Rate Led
- TDC Pulse Rate Led
- CKP Pulse Rate Led
Shipping Tracking Information
Once your order has been
shipped, you will receive an e-mail with your shipments tracking
information, allowing you to keep tabs on the progress of your delivery.
Please note: This is only if the tracking information are included with the shipping method.
Duty, Taxes and Customs
If applicable, duties and taxes will be included in the final price at
check out.
By placing an order with us, you acknowledge that this sale occurs
outside the United States.
You also acknowledge that you will be listed as the importer for Customs and Border Protection purposes and that your order will be imported in accordance with the necessary customs requirements.
Proceeding Time
Please allow us up to 3 business days to process your order. Products Warranty All physicals products sold and shipped have a warranty up to 6months after the order date.
All virtual/digital products (softwares, licenses) sold online does not have any warranty or refund.
- The product was faultly, not working, presence of defects or a problem/concerns occur upon receiving it.
Warranty does not cover:
- The product has been damaged by the customer or has became not working after using it for some times.
All products are fully tested before sending them to customers! **if the product require any testing**