This Repair Kit is directed to people with basic to medium knowledge in electronics and tools such as a soldering iron, solder wick, and solder.
( If you want to know more about installation you can search and watch youtube videos)
All parts are brand new and some may be upgraded from the OEM versions.
We do not provide component locations map, schematics or any kind of support.
All parts should be fairly easy to identify on the board.
You must be able to read component markings on your board to identify the components and take note of the correct
orientation of the original parts on your board to install them correctly.
The technician installing the parts is responsible for ordering the correct parts and installing
the parts correctly. Installation of parts will require the ability to read
the markings on your power supply board to locate the correct components to repair and install them correctly.
Improper handling could cause further damage to your board.
If you are not confident in your skills please hire a professional to perform the repairs.
REPAIR TIME:
Should take under an hour.
M-tronicz is offering this repair kit for a common failure in HOBART HANDLER 135 CONTROL BOARD# 195886
"Feed motor running full speed , slow motor or not running at all.
The feed motor will cool and then it will run again for about 15 seconds."
**********************************
Using same parts in our Repair Services.
You will receive parts from the same pool that our technician on site use.
Many of these are recommended replacements on the official Service Manual to correct factory installed parts.
M-tronicz recommends to replace all parts at the same time even if they look ok. these
parts tend to fail in different ways.
FREE HEAT SINK COMPOUND ADDED WITH THIS PURCHASE.
WHAT IS THE PURPOSE OF HEAT SINK COMPOUND?
For electrical applications, heat sink compound is used to thermally bond a component with a mechanical heat sink.
The compound is designed to efficiently transfer the heat from the heat generating component to the heat dissipating device.
***********************
Please be sure to match this number with your board # 195886
There are a lot of identical boards out there and one different number will change everything.
If you ordered the wrong part or ordered by mistake send me a message and I will handle the return process internally.
Just wait for the return form sent via ebay messages.
I will deduct return shipping from the return process. It is your responsibility to make sure you order the correct part.
I pay for shipping to you but if you order the wrong part and want a refund I deduct the price of return shipping.
***********************
<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>
Be sure to check out my other items for sale.
<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>
NOTE
**********************************************************************
Because not all of the boards fail in the same way, we do not guarantee that the components in this kit
is all you need to fix your board but it can take care 90% off all cases.
It's your responsibility to troubleshoot and properly diagnose your board in order to complete the repair.
It is important to note that the above described behavior can be caused by a number of very different
failures and not all of them could be related to this repair kit !
We recommend all kits fitted by a qualified personnel.
A successful repair depends on the own skill and fault finding ability.
This service kit is intended for use by persons having electrical, electronic
and mechanical experience and knowledge at level generally considered
acceptable in the consumer electronics and appliance repair trade.
DOING YOUR OWN REPAIR WORK: The removal and replacement/installation of electronic components
at the circuit board level is NOT recommended if you are not experienced with electronic
component and circuit board repair. If you are new to this stuff, please take our advice
and leave the work to a qualified expert- you will most likely thank yourself later.
It is VERY easy to cause damage to electrical parts and circuit boards
if repairs are not done with precision, neatness, and accuracy. It is very easy for
one to make problems WORSE than they were before, if one does not know what one is doing,
or does not have adequate experience with these kinds of parts and this kind of work in general.
F E E D B A C K
Fixed my problem at a very low cost. Buyer: hampti3
HOBART HANDLER 135 CONTROL BOARD 195886 ** REPAIR KIT** (#152926654555)
Worked great glad i didnt throw it away 6 years ago when it broke Buyer: fltiv2d32
HOBART HANDLER 135 CONTROL BOARD 195886 ** REPAIR KIT** (#152926654555)
Arrived well packed and safe. FAST SHIPPER A+ GEAT SELLER @@@WBA@@@ Buyer: mr_phill
HOBART HANDLER 135 CONTROL BOARD 195886 ** REPAIR KIT** (#152926654555)
Great buying experience!! Item as described! Would buy from again!! Worked well Buyer: luvadeal4u
HOBART HANDLER 135 CONTROL BOARD 195886 ** REPAIR KIT** (#152926654555)
Nice kit of repair parts. Very fast shipment. Buyer: leaper001
HOBART HANDLER 135 CONTROL BOARD 195886 ** REPAIR KIT** (#152926654555)
good transaction Buyer: skychutes
HOBART HANDLER 135 CONTROL BOARD 195886 ** REPAIR KIT** (#152926654555)
Order arrived ahead of schedule. Have not replaced components yet. Buyer: slmexcavating
HOBART HANDLER 135 CONTROL BOARD 195886 ** REPAIR KIT** (#152926654555)
Thanks for a fast delivery Buyer: layton101
HOBART HANDLER 135 CONTROL BOARD 195886 ** REPAIR KIT** (#152926654555)