HNT Gordon & Co. Large Flat Sole Spoke Shave

$226.77
Brand
H.N.T Gordon & Co.
Unit Type
Unit
Model
Large Flat Sole Spoke Shave
Wood Type
Gidgee
Unit Quantity
1
condition
New


This Flat sole Spoke Shave is 280mm long x 25 mm wide x 22 mm high. Weighs 0.5 Kg and has a 45mm wide x 1.6mm thick x 34mm long Tool Steel (TS) blade hardened to Rc 62-64 OR a High Speed Steel (HSS) blade hardened to Rc 62. The HSS is ideal if you plan to reverse the blade to bevel up and use it as a scraper on hard timber.

It has a 55 degrees blade pitch for planing, and by reversing the blade to bevel up it will perform as a scraper for use of hard cranky woods. The mouth is protected by a brass sole.
Used for fine finishing of outside curve work or profiling straight pieces of wood into ovals, rounds etc. such as a spoke.

A few 5 Star customer reviews can be seen below:

'Having very little experience with spokeshaves, after some practice I found this beautifully made tool a joy to use and I have since ordered and received the curved sole version.' - Anonymous. 'An exceptional tool. I had a certain amount of buyers remorse after purchase despite already having bought several superb planes from Terry as I had not had much experience with spokeshaves and what little I did have was not all that favourable. This spoke shave changed all of that - it is a positive joy to use and I could not list the number of uses I’ve put it to. It now lives within arms reach on the bench.' - Christopher D. 'OMG! I just got this today and it helped me make fast work of some 8" diameter rings in cherry for a furniture project. Trying to smooth the circle on a router scared the **** out of me but this spokeshave and a cabinet scraper made fast work with excellent results. What a pleasure to use. I'm going to order the round bottom tomorrow and go to work on the inside circumference.' - Michael H.