Hioki 9132-50 Clamp On Probe
Rated current 20 A to 1000 A AC, 6 ranges Accuracy ±3 % rdg. ±0.2 % f.s. (45 to 66 Hz)Frequency characteristics Add to amplitude accuracy for frequencies from 40 to 1 kHz: ± 1 % rdg.Output rate 0.2 V AC f.s. (f.s. = setting rage)(Connect to a voltage input device providing a high input impedance of 1 MΩ)Max. allowable input 1000 A rms continuous (all ranges)(For 40 Hz to 500 Hz: 100 %, and for 500 Hz to 1 kHz: within 90 % of derating)Max. rated voltage to earth 600 Vrms (50/60 Hz, CAT III)Core diameter φ55 mm (2.17 in), or 20 mm (0.79 in) × 80 mm (3.15 in) busbar Dimensions and mass 100 mm (3.94 in)W × 224 mm (8.82 in)H × 35 mm (1.38 in)D, 600 g (21.2 oz), cord length: 3 m (9.84 ft)Accessories Instruction manual ×1
Economical clamp sensors for waveform recording with Memory HiCorders
Choose from up to six general-purpose ranges
Note: For commercial power lines, 50/60 Hz (separate power supply not required)
More photos available on request.
Returns accepted only if notified within 30 days and only upon return of product. Buyer pays shipping.