High Torque Quartz Clock Movement Clock Mechanism Replacement with Hands Spade Long 12 Inch for DIY Clock

About this item

• Clock movement details: high torque clock movement replacement with hook, long shaft, drive long clock hands (10 mm to 450 mm)
• Total shaft length: 23 mm (1/ 10 inches), with thread length 11.7 mm (9/ 20 inches), jump second movement suits for 4-8 mm (4/ 25-3/ 10 inches) thickness clock panel
• Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long; The minute hand is about 305 mm/ 12 inches in length
• Package contents: 1 clock movement with hook, 2 hands and some mounting hardware, coming with specially designed cardboard box and instructions
• Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure, otherwise they will be bent

The accessories of the package

The package contains a clock movement with one hook, an hour hand, a minute hand and the accessories are also concluded. The length of hour hand is about 203 mm (8.0 inches), the minute hand is about 305mm /12 inches(from the hole center to the terminal) long, you can choose the dial plate according to the specifications if you want to DIY a clock.

Points should pay attention to

The hands are made of aluminum, you need to be careful when storing and installing them, or they are easy to be bent. Battery is not concluded. If you want to use the timing function, you need to buy a 1.5V AA battery. Please refer to the instruction on the back of the package, the steps are detailed.

Advantages of the clock movement mechanism

• Easy to install, you can finish the installation by 10 minutes.
• The instruction is on the back of the package, which can be an installation reference.
• Wide range of applications, can be used in DIY, decoration etc.