High Teck Paint HFP254 Dark Shadow Gray Metallic Gallon of Automotive Urethane Base Coat
Gallon of High Teck 7000 Multi-Purpose High Gloss Clearcoat
Quart 7006 High Teck Medium Hardener
And Gallon High Teck 7720 Medium Urethane Reducer
COMPARE To: FORD Paint Code CX Dark Shadow Gray Metallic
National rule product This product CAN NOT be USED in California due to VOC Regulations
It is your responsibility to comply with VOC regulations
A quick dry, good hiding, factory pack basecoat
Ideal for overalls and large blend area repairs
A great ground coat for use under other basecoat colors
APPLICATION
Surface Prep
For Dry Sanding Final sand with 500-600 Grit
For Wet Sanding Final sand with 800-1000 Grit
Clean area with Wax and Grease Remover and wipe dry with a clean cloth
Tack Cloth any dust or dirt particles
Mixing
Normal 1 Part Color, 1 Part Urethane Reducer
Better Hide 2 Parts Color, 1 Part Urethane Reducer
<10% Hardener(optional)
Spray Gun Set-Up
Gravity Feed 1.3-1.5mm 30 PSI at the gun inlGravity Feed HVLP 1.3-1.5mm 10 PSI max at air cap
Coats
Apply 2-4 coats or until full coverage is achieved
Allow each coat to flash off 5 to 10 minutes between coats
Allow 20 minutes flash time after last color coat to apply clearcoat