Brand new high output stator

Highest grade of lamination materials

Highest grade of copper winding resistant to 200 degrees Celsius

Direct replacement to your original unit

All products shipped are tested

The RM01050S stator looks very different from many of the compatible OEM Honda XR/XL 350/500/600 stators. However, it will work perfectly to replace and upgrade these parts.

To duplicate OEM functionality connect the Red/Black wire (ignition source coil), and the White wire (lighting coil) to their respective wires on the bike's harness, and ground the Green wire to the frame. The Yellow and Red wires can be insulated and tied up, unused.

Between the Yellow and Red wires is another 100 Watt coil that is floated, or NOT grounded to the stator core. This coil can be used with a regulator/rectifier to charge a battery, or to drive additional lights, heated grips, or other electrical accessories. If you are running an additional light directly from this coil (AC current), make sure to use an additional AC regulator to protect this lighting circuit (our RM30Y15 regulator will work great!).

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Brand new high output Stator

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation.
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius.
• Connector included
• Rubber grommet included
• All products shipped are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Honda XL 600 R -- 1983-1987
Honda XR 350 R -- 1983-1985
Honda XR 500 R -- 1983-1984
Honda XR 600 R -- 1985-1990

31120-HN5-416
31120-KF0-004
31120-KF0-771
31120-KN5-004
31120-KN5-406
31120-KN5-416
31120-MG2-005
31120-MG2-015
31120-MG3-000
31120-MG3-005
31120-MG3-015
31120-MK2-005
31120-MK5-004
31120-MK5-406

Dimensions:
Interior diameter: 54 mm
Exterior diameter: 115 mm
Thickness: 15 mm
Length of wires stator to grommet: 130 mm

Other specifications:
Number of wires: 5
Number of plugs: 5
Number of pins: 5

Wire to wire resistance:
Alternator: White to Green = 0.4 ohms +/-20%
Alternator: Yellow to Red = 0.4 ohms +/-20%
Source: Green to Red/Black = 140 ohms +/-20%

Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Our multiple North American locations, from which we ship our products, allows us to deliver 99.7% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.

If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.