HELIX COMBO
- HELIX P SIX DSP ULTIMATE 285w RMS per ch + 12-Channel DSP
- HELIX DIRECTOR Touchscreen Remote Control
- HELIX DMP Director Mounting Panel
HELIX P SIX DSP ULTIMATE
- Up to 285 W RMS output power per channel into 2 Ω
- Ultra HD Class D concept – combines the high-end sound quality of Class AB technology with the benefits of Class D amplifiers
- TwinDSP Power – two extremely powerful “fixed point” Audio DSPs with 64 Bit resolution and 2.4 billion MAC operations per second
- A/D and D/A signal converters from BurrBrown
- VCP (Virtual Channel Processing) allows even more flexible configuration for highly complex sound systems
- ACO – Advanced CoProcessor for extended feature set
- ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals
- Proprietary TuneEQ function for automated adjustment of the output equalizers
- SFX (DSP Sound Effects) – Augmented Bass Processing, RealCenter & Co.
- High power 6-channel highlevel input with up to 32 V RMS input sensitivity and ADEP.3 circuit
- Optical (max. 96 kHz) and coaxial (max. 192 kHz) digital input in SPDIF format
- Four RCA / Cinch outputs with max. 3 Volts output voltage
- Optical digital output in SPDIF format (96 kHz)
- Compact, future-proof Smart Control Port (SCP) for connecting remote controls and accessories
- HEC slot for system expansions like Bluetooth® HD Audio Streaming, High Resolution Audio Streaming via USB etc.
- Automatic Remote switch
- Start-Stop capability down to 6V supply voltage
- Very compact design with low heat dissipation thanks to extraordinary efficiency
Technical data
| Power RMS ≤ 1% THD+N | |
| - @ 4 Ohms | Channel A - F: 6 x 120 Watts |
| - @ 2 Ohms | Channel C - F: 4 x 230 Watts |
| - @ 1 Ohm | - |
| - bridged @ 4 Ohms | - |
| - bridged @ 2 Ohms | - |
| Max. output power per channel* | Channel A - F: up to 145 Watts RMS @ 4 Ohms Channel C - F: up to 285 Watts RMS @ 2 Ohms |
| Amplifier technology | Ultra HD Class D |
| Inputs | 6 x RCA / Cinch 6 x Highlevel speaker input 1 x Optical SPDIF (12 - 96 kHz) 1 x Coax SPDIF (12 - 192 kHz) 1 x Remote In |
| Input sensitivity | RCA / Cinch 1 - 4 Volts or 4 - 8 Volts Highlevel 4 - 16 Volts or 8 - 32 Volts |
| Input impedance RCA / Cinch | 13 kOhms |
| Input impedance highlevel | 9 - 33 Ohms with ADEP.3 |
| Outputs | 6 x Speaker output 4 x RCA / Cinch 1 x Optical SPDIF (96 kHz) 2 x Remote Out |
| Output voltage RCA / Cinch | 3 Volts |
| Frequency response | 10 Hz - 44,000 Hz |
| DSP resolution | 64 Bit |
| DSP power | 2 x 295 MHz (2.4 billion MAC operations/second) |
| Sampling rate | 96 kHz |
| DSP type | 2 x Audio signal processor |
| Signal converters | A/D: BurrBrown D/A: BurrBrown |
| Signal-to-noise ratio digital input | 108 dB (A-weighted) |
| Signal-to-noise ration analog input | 102 dB (A-weighted) |
| Distortion (THD) | < 0,004 % |
| Damping factor | > 100 |
| Operating voltage | 10.5 - 32 Volts (max. 5 sec.down to 6 Volts) |
| Power rating | DC 12 / 24 V ⎓ 65 A max. |
| Idle current | 1350 mA |
| Max. remote output current | 500 mA |
| Operating temperature range | -40° C to +70° C |
| Fuse | 3 x 20 A LP-Mini-fuse (APS) |
| Additional features | 32 Bit CoProcessor, HEC slot, ADEP circuit, Auto Remote switch, Smart Control Port |
| Dimensions (H x W x D) | 50 x 260 x 190 mm / 1.97 x 10.24 x 7.48“ |
* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)
DIRECTOR
- Display Remote Control
Everything under control!
With the new remote control DIRECTOR,
you lead from the front!
The 2.8” / 7 cm full colour touchscreen display and the intuitive menu
navigation allow easy handling of many features – for example:
- Source selection
- Volume control of all sources
- Volume control of the subwoofer
- Control and configuration of the HEC BT module
- Switching between sound setups
Furthermore it provides sufficient
memory for 20 additional sound setups and comes with a USB connector allowing
straight access to your DSP device via the DIRECTOR - a big relief if you want
to tweak your configuration while your processor/amplifier is hidden somewhere
in the trunk.
The high-resolution, full colour touchscreen display is housed in what was
solid block of aluminum.
The DIRECTOR is compatible with all DSP products which are supported by DSP
PC-Tool Version 3 and higher.
Features
§ 2.8“ /
7 cm touchscreen display and powerful ARM processor
§ Easy
handling of the main functions
§ Volume
control of all sources
§ Volume
control of the subwoofer
§ Source
selection
§ Control
of the HEC BT module (Bluetooth® Connect
functions: pairing, reconnect, disconnect / Bluetooth® Control
functions: track forward/back, play/pause)
§ Switching
between sound setups
§ Memory
locations for 20 additional sound setups (only devices without ACO platform)
§ Automatic
dimming function of the display
§ Display
rotation adjustable to 180°
§ Compatible
with all DSP products which are supported by DSP PC-Tool Version 3 and higher
§ Exclusive
solid aluminum housing
§ 17’ /
5.2 m connection cable included
Technical
data
|
Dimensions
(H x W x D) |
53.50 x 135 x 18 mm; |
DMP
DIRECTOR mounting
panel is made from an ABS plastic with a refined, black soft touch finish.
This ensures a safe, flush finish that allows the Director to blend into your
cars interior.
Features
§ Material: ABS with
black soft touch finish
§ Mounting screws for
fixing the DIRECTOR to the mounting panel are included in delivery