HELIX COMBO
·
HELIX DSP ULTRA S Digital High-Res 12-Channel Signal Processor
·
HELIX DIRECTOR Touchscreen Remote
Control
·
HELIX DMP Director Mounting Panel
·
HELIX HEC BT HD Bluetooth Hi-Def Streaming
HELIX DSP ULTRA S
Features
- TwinDSP Power – two extremely powerful “fixed point” Audio DSPs with 64 Bit resolution and 2.4 billion MAC operations per second for an extensive sound customization of all processed channels:
- Eight input channels
- Eight virtual channels
- Twelve output channels
- Cutting-edge audio signal path for minimized distortion and unparalleled sound quality
- AKM Velvet Sound™ 32 Bit AD and DA signal converters
- Highest-quality operational amplifiers from the TI / BurrBrown "OPA series" with SoundPlusTM technology
- Refined design of the analog inputs for outstanding noise immunity
- Smart 8-channel highlevel input with ADEP.3 circuit
- ACO – Advanced 32 Bit CoProcessor platform for extended feature set:
- ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals
- DLC (Dynamic Loudness Control) and RTC (Remote Tone Control) for volume-dependent dynamic adjustment of highs and lows
- Proprietary TuneEQ function for automated adjustment of the input, virtual and output equalizers
- SFX (DSP Sound Effects) – Augmented Bass Processing, RealCenter & Co.
- VCP (Virtual Channel Processing) allows even more flexible configuration for highly complex sound systems
- HEC slot for system add-ons like Bluetooth® HD Audio Streaming, High Resolution Audio Streaming via USB etc.
- Start-Stop capability down to 6V supply voltage
- “Ground lift” switch to avoid ground loops
- Continuous adjustment of the input sensitivity (highlevel up to max. 32 Volts, RCA / Cinch up to max. 8 Volts)
- Compact, future-proof SCP (Smart Control Port) for connecting remote controls and accessories
- Time alignment with up to 20 ms delay time per channel, additionally reverse time alignment for in-phase summation of the inputs
- Freely definable signal routing with separate matrices for line, SPDIF and HEC/AUX
- Inputs: 8 x RCA/Cinch, 8 x Highlevel, 1 x optical SPDIF and 1 x coaxial SPDIF
- Outputs: 12 x RCA/Cinch with max. 8 Volts output voltage
- Easiest configuration via the intuitive DSP PC-Tool 5 software
- TwinDSP Power – two extremely powerful “fixed point” Audio DSPs with 64 Bit resolution and 2.4 billion MAC operations per second for an extensive sound customization of all processed channels:
- Eight input channels
- Eight virtual channels
- Twelve output channels
- Cutting-edge audio signal path for minimized distortion and unparalleled sound quality
- AKM Velvet Sound™ 32 Bit AD and DA signal converters
- Highest-quality operational amplifiers from the TI / BurrBrown "OPA series" with SoundPlusTM technology
- Refined design of the analog inputs for outstanding noise immunity
- Smart 8-channel highlevel input with ADEP.3 circuit
- ACO – Advanced 32 Bit CoProcessor platform for extended feature set:
- ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals
- DLC (Dynamic Loudness Control) and RTC (Remote Tone Control) for volume-dependent dynamic adjustment of highs and lows
- Proprietary TuneEQ function for automated adjustment of the input, virtual and output equalizers
- SFX (DSP Sound Effects) – Augmented Bass Processing, RealCenter & Co.
- VCP (Virtual Channel Processing) allows even more flexible configuration for highly complex sound systems
- HEC slot for system add-ons like Bluetooth® HD Audio Streaming, High Resolution Audio Streaming via USB etc.
- Start-Stop capability down to 6V supply voltage
- “Ground lift” switch to avoid ground loops
- Continuous adjustment of the input sensitivity (highlevel up to max. 32 Volts, RCA / Cinch up to max. 8 Volts)
- Compact, future-proof SCP (Smart Control Port) for connecting remote controls and accessories
- Time alignment with up to 20 ms delay time per channel, additionally reverse time alignment for in-phase summation of the inputs
- Freely definable signal routing with separate matrices for line, SPDIF and HEC/AUX
- Inputs: 8 x RCA/Cinch, 8 x Highlevel, 1 x optical SPDIF and 1 x coaxial SPDIF
- Outputs: 12 x RCA/Cinch with max. 8 Volts output voltage
- Easiest configuration via the intuitive DSP PC-Tool 5 software
Technical data
Inputs 8 x RCA / Cinch
8 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x Coax SPDIF (12 - 192 kHz)
1 x Remote In Input sensitivity RCA / Cinch 1 - 8 Volts
Highlevel 4 - 32 Volts Outputs 12 x RCA / Cinch
1 x Remote Out Output voltage 8 Volts Frequency response 10 Hz - 44,000 Hz DSP resolution 64 Bit DSP power 2 x 295 MHz (2.4 billion MAC operations/second) Sampling rate 96 kHz DSP type 2 x Audio signal processor Signal converters A/D: Asahi Kasei 32 Bit
D/A: Asahi Kasei 32 Bit Signal-to-noise ratio digital input 117 dB (A-weighted) Signal-to-noise ratio analog input 111 dB (A-weighted) Total harmonic distortion (THD+N) digital input < 0.0004 % Total harmonic distortion (THD+N) analog input < 0.0008 % IM distortion (IMD) digital input < 0.0015 % IM distortion (IMD) analog input < 0.003 % Crosstalk > 90 dB Operating voltage 9.6 - 17 Volts (max. 5 sec. down to 6 Volts) Power rating DC 12 V ⎓ 1.1 A max. Current draw 550 mA Max. remote output current 500 mA Operating temperature range -40°C to +70°C Additional features HEC slot, Ground lift switch, Smart Control Port, 32 Bit CoProcessor, ADEP.3 circuit, Auto Remote switch Dimensions (H x W x D) 40 x 177 x 170 mm /
1.58 x 6.97 x 6.69“
| Inputs | 8 x RCA / Cinch 8 x Highlevel speaker input 1 x Optical SPDIF (12 - 96 kHz) 1 x Coax SPDIF (12 - 192 kHz) 1 x Remote In |
| Input sensitivity | RCA / Cinch 1 - 8 Volts Highlevel 4 - 32 Volts |
| Outputs | 12 x RCA / Cinch 1 x Remote Out |
| Output voltage | 8 Volts |
| Frequency response | 10 Hz - 44,000 Hz |
| DSP resolution | 64 Bit |
| DSP power | 2 x 295 MHz (2.4 billion MAC operations/second) |
| Sampling rate | 96 kHz |
| DSP type | 2 x Audio signal processor |
| Signal converters | A/D: Asahi Kasei 32 Bit D/A: Asahi Kasei 32 Bit |
| Signal-to-noise ratio digital input | 117 dB (A-weighted) |
| Signal-to-noise ratio analog input | 111 dB (A-weighted) |
| Total harmonic distortion (THD+N) digital input | < 0.0004 % |
| Total harmonic distortion (THD+N) analog input | < 0.0008 % |
| IM distortion (IMD) digital input | < 0.0015 % |
| IM distortion (IMD) analog input | < 0.003 % |
| Crosstalk | > 90 dB |
| Operating voltage | 9.6 - 17 Volts (max. 5 sec. down to 6 Volts) |
| Power rating | DC 12 V ⎓ 1.1 A max. |
| Current draw | 550 mA |
| Max. remote output current | 500 mA |
| Operating temperature range | -40°C to +70°C |
| Additional features | HEC slot, Ground lift switch, Smart Control Port, 32 Bit CoProcessor, ADEP.3 circuit, Auto Remote switch |
| Dimensions (H x W x D) | 40 x 177 x 170 mm / 1.58 x 6.97 x 6.69“ |
DIRECTOR
- Display Remote Control
Everything under control!
With the new remote control DIRECTOR,
you lead from the front!
The 2.8” / 7 cm full colour touchscreen display and the intuitive menu
navigation allow easy handling of many features – for example:
- Source selection
- Volume control of all sources
- Volume control of the subwoofer
- Control and configuration of the HEC BT module
- Switching between sound setups
Furthermore it provides sufficient
memory for 20 additional sound setups and comes with a USB connector allowing
straight access to your DSP device via the DIRECTOR - a big relief if you want
to tweak your configuration while your processor/amplifier is hidden somewhere
in the trunk.
The high-resolution, full colour touchscreen display is housed in what was
solid block of aluminum.
The DIRECTOR is compatible with all DSP products which
are supported by DSP PC-Tool Version 3 and higher.
Features
§ 2.8“ /
7 cm touchscreen display and powerful ARM processor
§ Easy
handling of the main functions
§ Volume
control of all sources
§ Volume
control of the subwoofer
§ Source
selection
§ Control
of the HEC BT module (Bluetooth® Connect
functions: pairing, reconnect, disconnect / Bluetooth® Control
functions: track forward/back, play/pause)
§ Switching
between sound setups
§ Memory
locations for 20 additional sound setups (only devices without ACO platform)
§ Automatic
dimming function of the display
§ Display
rotation adjustable to 180°
§ Compatible
with all DSP products which are supported by DSP PC-Tool Version 3 and higher
§ Exclusive
solid aluminum housing
§ 17’ /
5.2 m connection cable included
Technical
data
|
Dimensions
(H x W x D) |
53.50 x 135 x 18 mm; |
DMP
DIRECTOR mounting
panel is made from an ABS plastic with a refined, black soft touch finish.
This ensures a safe, flush finish that allows the Director to blend into your
cars interior.
Features
§ Material: ABS with
black soft touch finish
§ Mounting screws for fixing the DIRECTOR to the mounting panel are included in delivery
HELIX
HEC BT HD
Features
- Bluetooth® audio streaming powered with Qualcomm® aptX™
HD audio codec
- High Definition audio transmission with up to 576 kbps and 24 Bit/48
kHz sampling rate thanks to BT5.0+EDR standard
- Supported Audio Codecs: SBC, AAC, aptX & aptX HD
- Direct digital signal transmission to DSP for lossless audio
processing
- Enables wireless tuning of the DSP via the DSP PC-Tool software for
all DSP devices with ACO platform (DSP PC-Tool V5 required – coming in
beginning of 2022)
- Supports the artist & title displaying function of the DIRECTOR
display remote control (only ACO devices / from DIRECTOR software version
2.10)
- Supports control commands like play/pause, track forward/back,
connecting, pairing and disconnecting the connected DSP remote control
(e.g. CONDUCTOR and DIRECTOR) as well as display of the currently used
audio codec