Product Features:
☆the Drill Angle Can Be Adjusted up to 50 Degrees
☆Adjust the Pipe Clamps on Two Shafts, the Diameter Is Between 19 and 76mm
☆Sturdy Structure with Frame Thickness of 1-1/4 Inches
☆Accurately Adjust the Vertical Height of the Mandrel
☆Use a Hand Drill with 1/2’’ Linker for Operation, Drill Requires M12 or M15 Linker
☆Heavy 1/4’’ Thick Steel Frame Suitable for All Cnc Machining
☆2-Axis Adjustable Pipe Clamp, Which Can Offset the Notch by 1/2’’ Vertical and 1’’ Polished Stainless Steel Shaft
☆Easy to Install: Use Bolts to Fix or Fix It on the Workbench, or Simply Fix It on the Workbench, Use a Vise to Clamp It in the Vise
☆Use a Cheap Bimetal Hole Saw
☆Requires Ordinary 1/2 Inch Hand Drill
Specifications:
Model: Pnm1-1/2 Inches
Capacity: from 3/4’’ to 3’’Od
Angle: Angle up to 50 Degrees
Net Weight/Gross Weight: 9.6/10.5kg
Color:as Picture
Material:iron
Package Included:
1 * Pipe & Tube Notcher
Welcome to autocomponents999
Thank you for your support!
If you have any questions,please feel free to contact us!!!
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
