Tap Reseater with 1/2 and 3/4”
The Haron STR34 Tap Re-seater, is designed to re-seat both interior and exterior 1/2" and 3/4" taps (12.7mm & 19mm).
For Reconditioning Tap Seats
1 Remove and dress fittings and handles.
2 Use the appropriate HARRON tap spanner to remove spindle.
3 Remover the washer.
4 Insert the Tap Re-Seater into the body and screw the bush home into the body thread.
5 Holding the knob at the top of the tool, with light downward pressure, turn the knob clockwise so that the cutter removes a small amount of the seat. Be sure the cutter does this without chatter. Five or Six complete rotations is normally adequate.
6 Examine the seat to make sure that it is re-cut smoothly. A torch maybe useful to examine the seat.
7 Replace the tap assembly after fitting a new washer.
- Part no: STR34.
- Total Weight: 300g
- Bonus: 2 x Tap Washers .
-
STR34 Re-seater accommodates both 1/2"(12.7mm) and 3/4" (19mm) taps