HANGKAI 2/4Stroke 6-12 HP Outboard Motor Air/Water Cooling Fishing Boat Engine

$192.68
MODEL
3.5HP & 2-Stroke(TYPE ONE)
Cooling System
Water-Cooling
Brand
HANGKAI
Shipping Notice
Can not ship to Puerto Rico,Alaska/Hawaii
Transportation does not include
Canary Islands
Item Location
CA /NJ /Austell
Note
Do not send to Brazil
Feature 4
FAST SHIPPING FROM US LOCAL WAREHOUSE!
Feature 3
Stable performance,Durable
Feature 2
Easy installation,Convenient Use,Easy Operation
Feature 1
Great Durability,Exquisite Appearance,High-quality
Material
High quality material
Manufacturer Warranty
3 Years
Country/Region of Manufacture
Unknown
--Service--
Any problem, please contact the seller!✨✨
Warranty
3 Years✨✨✨
After-sales Service
YES !
Highlights
Convenient Use,Easy Operation,Easy installation
Style 1
Beautiful Appearance
Tip
Any problem, please contact us !
Boat & Watercraft Type
Outboard Motors
condition
New
HANGKAI 2/4Stroke 6-12 HP Outboard Motor Air/Water Cooling Fishing Boat Engine
DESCRIPTION:
 

Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.

Don't do the following will avoid cylinder Scoring:

1,start the motor on bank

2, use the motor when it stop coming out of water

Even if you want test the motor, it should be done in the river!

 

1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon
2.The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed, please be noticed
3.It can be marched with inflatable boats, rubber boats or fishing boats
4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boat

MODEL ONE: 3.5HP & 2-Stroke(TYPE ONE) 

Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode


Strictly for Professional Use Only
Please Note:
There are two pull starter included in the parcel(one is the machine, another one for spare)
We don't supply wearing parts (pull starter)for free.
If you want buy one please click:

Description:
Overall length:92CM
Overall widteh:36.5cm
Overall height:22cm
Transom height:42cm
Full throttle perating range:4000-5000r/min
MAX SPEED:4000~5000rpm
Maximum output:(3.5HP)
Speed:10km/h
Type:2-stroke
Short shaft :40cm
Ignition system: CDI system
Starting system: Manual start
Staring carburetion system: Choke start
Propeller mark:7-1/45-A(inch)
The engine and the propeller ratio:2:1
Recommended fuel: Regular unleaded gasoline
Fuel to oil ratio: 35:1 (Please be suject to this version, and disregard the manual about this point)
Gear ratio: 27/13
Maximum speed: 10 km / h
Built-in fuel tank: 1.3L
Fuel consumption per hour: 1.5L
When at normal cruising, the appearance of the seventh picture. Falling back the boat, the appearance of the outboard motor likes the eighth picture . Falling back the boat, you should drive slowly otherwise the boat will not stable. The outboard motor backet can revolve 360. Only in simple let the engine revolve 180 and the operation handle face back, the boat can fall back to drive.

Announcements:
After in the sea water or turbid water cruising
1.Use the fresh water cleaning the outboard motor
2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water.
3.Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown.
4.The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine.
5.Before the long term storing,you should run out of the gasoline in the fuel tank.


MODEL TWO: 3.6HP & 2-Stroke
 

Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us).our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode 

STRICTLY FOR PROFESSIONAL USE ONLY
1.Start-In-Gear protection/clutch feature prohibits prop rotation while idling
2.Lift/Tilt feature for shallow water operation and convenience
3.Features 360 degree steering rotation for reverse without gear shifting
4.Superior engine water cooling system for improved engine performance
5.Easy pull off engine cover with push button latch for instant motor access

Product Description

MAX SPEED:4000~5500rpm
 
Short shaft :40cm  
Features: Features 360 degree steering rotation for reverse without gear shifting .
Start-In-Gear protection/clutch feature prohibits prop rotation while idling .
Lift/Tilt feature for shallow water operation and convenience . Superior engine water cooling system for improved engine performance . Easy pull off engine cover with push button latch for instant motor access . Standard CDI ignition system for easy starting and improved
performance . Vertical mount engine design for increased power, performance and durability . Superior carbonation system with primer bulb for increased efficiency .
Twist grip throttle handle and engine stop button for improved response .
Superior outboard anti corrosion system and anodes for increased durability .
Durable cast Nylon plastic construction for superior corrosion protection .
Through the prop exhaust outlet for decreased noise and pollutant .
Heavy duty lightweight Nylon plastic cast propeller is standard equipment

Shipping Weight: 21.4 pounds

 


MODEL THREE:3.5HP & 2-Stroke (TYPE TWO)

Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

 

Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode

 

Please Notice:STRICTLY FOR PROFESSIONAL USE ONLY

What you will receive is our new version of this boat engine

The trademark will be Yadao instead of Speeda.

Overall length:92CM
Overall widteh:36.5cm
Overall height:22cm
Transom height:42cm
Full throttle perating range:4000-5000r/min

MAX SPEED:4000~5000rpm
Maximum output:(3.5HP)
Speed:12km/h(four people)
Type:2-stroke
Short shaft :40cm
Ignition system:CDI system
Starting system:Manual start
Staring carburetion system:Choke start]
Propeller mark:7-1/45-A(inch)
The engine and the propeller ratio:2:1
Recommended fuel:Regular unleaded gasoline
Fuel to oil ratio: 35:1 (Please be suject to this version, and disregard the manual about this point)
Gear ratio: 27/13
When at normal cruising,the appe
arance ofthe seventh picture. Falling back the boat, the appearance of the outboard motor likes theeighth picture . Falling back the boat, you shoulddrive slowly otherwise the boat will not stable. Theoutboard motor backet can revolve 360. Only in
simple let the engine revolve 180 and the operation handle face back,the boat can fall back to drive.
Announcements
After in the sea water or turbid water cruising
1.Use the fresh water cleaning the outboard motor
2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water.
3.Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass