GunSkins Mag Skins are Do It Yourself Vinyl Wraps for Any M-Series Compatible Airsoft Magazines
Cover, protect, and identify your magazines with GunSkins Airsoft Mag Skins! Our precut templates make installation quick and easy. Simply clean the surface, peel and press, add heat to conform, and trim away any excess material. GunSkins offers top of line camouflage and specialty patterns to choose from, fit for any application.
GunSkins Airsoft Mag Skins are designed to fit any 120 round M-Series compatible AEG magazines. The kit includes pieces for the left and right side of a single magazine.
Modern Airsoft Mag Skin Kit Template with Precut Pieces
GunSkins Airsoft Mag Skins will fit any brand of airsoft magazine. They are compatible with any M-Series Airsoft Electric Guns (AEG) and regular BB guns. The kit comes with the following precut pieces to install on one magazine:
- - Left mag (installed first)
- - Right mag (installed second)
They are waterproof and have a non-reflective matte finish. GunSkins Airsoft Mag Skins conform to any shape and are easy to install. For smaller capacity magazines, install centered and trim away excess material for the perfect fit.
GunSkins Airsoft Mag Skins are available in a variety of tactical, hunting, and specialty camouflage patterns.
Frequently Asked Questions
- Why won't the vinyl stick to the surface of my mag?
- You must thoroughly clean the mag before installing the wrap. Use a gun-specific degreaser and a small brush, scrubing all recessed areas to remove oil and dirt. Wipe clean using a lint-free cloth or rinse with warm water and let air dry.
- Can the wrap be removed?
- GunSkins are removable and have no effect on the finish. To remove, heat the material with a heat gun/blow dryer and peel off piece by piece.
- Is it waterproof?
- The high-performance vinyl is non-porous, which means that the material creates an air-tight seal that also prevents water from getting in or out. As a matter of fact, GunSkins are completely waterproof.
- How durable are GunSkins?
- GunSkins are made from a high-performance vinyl. The material is 6/10 mm in thickness and will add an extra layer of protection to the surface of your mag.
Step by Step Installation Instructions
Clean the Surface.
Use a gun-specific degreaser and a small brush to work away all dirt, oil, lubrication, and residue. Rubbing alcohol is a good last step to remove moisture, but alone is not strong enough to cut through gun oil.
A clean mag makes for a clean install.
Peel and Stick.
Peel the material off the template, one piece at a time. Place it centered on the surface and work it in using your fingers.
If need to, peel off and reposition until you are satisfied with the placement.
Heat and Trim.
Use a heat gun or blow dryer to get the vinyl to conform to the shape of the mag. Take your time and work away wrinkles and air bubbles.
Use a sharp hobby knife to trim away excess material. Overlap the extra and press firmly to set. Heat again to finish.