This offer is for a single sheet of the ORIGINAL Scratch Pad Guitar Finish Protector material, FULL SIZE, in
Brilliant Royal Blue, NO LOGO.
>>>>Not Just for Guitars... Great for Banjo, Mandolin, Ukulele, Lap Steel Guitars too!<<<<
These are approximately 15" x 18" that can be cut to offer FULL coverage to most any body size. Note the picture of the full sized acoustic guitar... The guitar body shape was traced with a sharpie on the reverse side of the pad, on the release liner, then cut inside the line to the size shown. I also used Tulip Color Shot Instant Fabric Color (NOT included) to make it black... worked great and inexpensive!
>>> NOTE: These are not factory cut, exact size may vary slightly, picture of the original size blue Scratch Pad is for reference only, and is not what's being sold, see other pics <<<
Protect your Guitar from Buckles, Buttons, Zippers, etc... Condition is New factory second. FREE shipping. Shipped USPS First Class Package. The "ORIGINAL" size sold for MSRP $26.95 online and in stores $19.95... This sheet is nearly twice the size!
>>> The full body cover that some sell are way thicker than need to be and may cause a difference in tone that resonates with wooden body guitars or instruments. <<<
Scratch Pad®
is an attractive, NON-ADHESIVE, REMOVABLE guitar finish protector which
is easily applied, removed and re-applied to another guitar in seconds. Easily cleans up with an alcohol wipe or lint free cloth and rubbing alcohol.
Scratch Pad's
multi-layered design shields your guitar from the scratches, dings and
impact-divots which are caused by belt buckles, buttons, zippers, snaps,
pocket rivets and... the abrasive effect of denim.
Scratch Pad's "Sof-Cling"TM technology
allows Scratch Pad to cling gently but securely to your guitar or bass
WITHOUT the use of adhesives, elastic bands or vinyl films.
*********************************** Important Info from the Manufacturer ***************************************
Q: Is Scratch Pad compatible with my instrument's finish? A 1.) Acrylic: Because
the vast majority (approx. 85%) of guitars are manufactured
with acrylic finishes, Scratch Pad has been developed specifically to
accommodate, and has been found to be compatible with all acrylic (polyurethane, polyester) finishes.
A 2.) Nitrocellulose: A
small percentage of guitars are manufactured with a lacquer known as
Nitrocellulose. Although not recommended for prolonged exposure, Scratch
Pad has been tested and found to be compatible with MOST
nitrocellulose formulas. Certain nitrocellulose formulas may require as
much as a year or longer to fully cure. Because it would be impossible
to test all nitrocellulose finishes, it is recommended that you
consult with your instrument's manufacturer regarding THE STABILITY OF THEIR NITROCELLULOSE FINISHES.
NOTE: NITROCELLULOSE MANUFACTURERS ADVISE AGAINST PROLONGED EXPOSURE WITH ANY
MATERIAL (guitar picks, guitar straps, guitar stands, etc.) WHICH WOULD
RESTRICT AIR FLOW TO A NITROCELLULOSE FINISH. SCRATCH PAD, LLC EXTENDS
THIS WARNING BY INSTRUCTING USERS TO
NEVER STORE A NITROCELLULOSE FINISHED INSTRUMENT IN A STORAGE CASE WITH THE SCRATCH PAD APPLIED.
NOTE: Your
local Guitar Retailer can also be helpful in determining the type of
finish (Polyurethane or Nitrocellulose) which has been applied to your
instrument.
NOTE:
When not in use, Scratch Pad should be stored on the release liner
(backing) which was supplied with your Scratch Pad. The release liner
will keep your Scratch Pad free from dust and other contaminants.
A 3.) French Polish,developed
in the 16th Century, French Polish refers to a thin, hand rubbed
application/s of Shellac. With the exception of a few custom guitar
manufacturers and Luthiers, virtually all instrument manufacturers
discontinued the application of French Polish by the 1920s. However,
due to the delicate nature of French Polish, Scratch Pad is NOT
RECOMMENDED FOR FRENCH POLISH FINISHES.
Please feel free to contact me prior to purchase with any questions or concerns.
Thanks for stopping by.
