| Input Style: | C-Face Quill | Output Shaft Assembly Code: | D |
| Input HP: | 1.279 | Output Key: | 3/16 X 1.50 |
| Output RPM: | 175 | Output Shaft Orientation: | LR |
| Frame Size: | 56C | No. of Gear Reductions: | Single |
| Series Style: | GR-BMQ-D | Series Type: | Cast Iron 800 Worm Gear Reducers |
| Mounting Style: | Base | Reducer Style: | Worm - Right Angle |
| Series Code: | GR | Nominal Motor HP Rating to HP @ 1750 RPM: | 1 |
| Overhung Load: | 860 | Keyway: | 3/16 X 3/32 |
| Output Style: | D | Output HP: | 1.116 |
| Input RPM: | 1,750 | Motor HP Rating: | 1 |
| Output Diameter (in): | 0.750 in | Ratio Range: | 10:1 |
| Input Keyway: | 3/16 X 1.38 in | Product Line: | GR Series - Ironman Worm Gear Reducers |
| Gear Type: | Worm | Center Distance (in): | 1.54 |
| Input Bore (C Face): | 0.625 | Ratio: | 10:1 |
| Input Diameter (in): | 0.625 in | Thrust Rating - output shaft: | 1056 |
| Input Keyway (C Face): | 3/16 x 3/32 | Shaft Seal Material: | Viton |
| Assembly: | BMQ-D | Motor Frame Size: | 56C |
| Series: | GR Series - Ironman Worm Gear Reducers | Input HP @ 1750 RPM: | 1.279 |
| Reducer: | Worm - Right Angle | Input Quill Diameter (in): | 0.625 in |
| Product Type: | Worm Speed Reducer | Service Factor: | 1 |
| Model Code: | BMQ815 | Reduction: | Single |
| Output Shaft Direction: | Double | Housing Material: | Cast Iron |
| Output Shaft: | Solid Shaft | Output Torque Rating (in-lb): | 402 in/lbs |
| Overhung Load Rating (Output Shaft(lb)): |
