Notice: Per eBay policies eBay will not send the seller the payment funds until after the equipment is received by the purchaser and the purchaser sends eBay confirmation of receipt. Unfortunately we are not able to ship without payment received 1st.
When you select the "Buy It Now", Please do not pay through eBay for the equipment purchased from our store.
After you choose the "Buy It Now", we will be able to see your purchaser information.
Our accounting dept will reach out for payment.
We accept credit cards, ACH and wire transfer.
We apologize for any inconvenience, but we cannot ship our equipment without 1st receiving payment in full. We have been in business for over 40 years and are well known throughout the metalworking machinery industry. You can buy with confidence and we will stand behind everything we sell! Our goal is to have satisfied customers!
Thanks,
Sierra Victor Machinery.
(only to commercial addresses with forklift in the lower 48 states)
|
Max. capacity: mild steel ( C.R.S.)
|
1/4 in.
|
|
Max. capacity: stainless steel
|
3/16 in.
|
|
Min. notching thickness
|
22 Ga.
|
|
Notching angle, fixed angle
|
90 degree
|
|
Max. cutting length
|
10 in.
|
|
Stroke per minute
|
27
|
|
Table dimensions, L x W
|
33 x 27 in.
|
|
Hydraulic oil tank capacity
|
9 Gal. Shell #68HD
|
|
Main motor
|
7-1/2 HP, 3 Phase, 25A
Prewired: 220VAC Optional: 440VAC 220V 15A |
|
Machine weight
|
2,650 lbs
|
|
Machine dimensions, (L x W x H)
|
39 x 38 x 49 in.
|
|
Shipping Dimensions, (LxWxH)
|
47 x 41 x 56 in.
|
Design and Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts
FEATURES:- The GMC Hydraulic Notcher delivers clean and sharp corner cuts. You can notch up to a 1/4" thick sheet metal up to 12 strokes per minute. You can re-sharpen the blades repeatedly to improve the lifespan and save money.
- ISO 9001 certified
- Super large table
- Milled table surface with engraved scales on left and right side of the table top
- 12" combination hold down and stop bars
- All steel construction
- Safety finger guards
- (2) quick change gauges
- Foot pedal control
- Quiet hydraulic system
- One year warranty
- **This machine is compatible with a phase converter. Please note that the phase converter must be installed by GMC Machine Tools to ensure warranty coverage.
- **Once the machine is received and the phase converter is installed by us, it will be ready for use. For more information or if you have any further questions or need assistance, feel free to contact us.