Genuine Alsa Easy Chrome Paint. 1 quart does 500 ft chrome

Slide Slide
$799.0
Brand
Alsa
Container Size
8.4535 ounce
Application Method
Paint
Type
Chrome paint
Unit Type
gal
Drying Time
4 days
Color
Chrome
Features
Easy Chrome
Sheen
Gloss
Unit Quantity
.25
Suitable For
Any
condition
New
Pure silver. Mirror. We GUARANTEE CHROME! EASY CHROME’s shine is near equal to our silver nitrate system. So it can repair chrome as well. Fix your chrome with just a can of Easy Chrome in the trunk. As easy as that! The same shine as our Chroming machines but in a simple spray! With or without a topcoat, if you are looking for a chrome paint that is tough as nails, then Easy Chrome is the perfect choice for you. It will give you a mirror-like finish that will last for years to come.

(Needs high gloss basecoat and dry 4 days or won’t work. Cheap brands simply don’t.)


FOR BEST RESULT PLEASE FOLLOW THE APPLICATION GUIDE BELOW


Easy Chrome can be applied on any surface: Plastic, Metal, Concrete Foam and Wood!

Number one hack is drying the basecoat. 


Step 1: Your part must be prepped and primed before beginning application. The surface should be very

smooth.

We say mirror in mirror out. 


Step 2: Start by applying our Easy Chrome Basecoat, this basecoat is made exclusively for Easy Chrome.

You will need this Basecoat in order for the Chrome to work. Once you apply, 1 coat basecoat must be

very glossy, like a very wet look.


***DRY TIME: Air Dry your part 4 days. This is crucial. minimum of 75 degrees THROUGHOUT the 4 days/ if you oven Dry your part 10-12hrs+ 140F


The basecoat needs to FULLY CURE so not just dry. 


Any out gassing during cure time will blur the chrome. Especially the 2k basecoats. 


***NOTE: The Dryer your part the better your chrome will turnout.

Many wait a week or more. Especially the 2k paints. 


Step 3: Begin applying your Easy Chrome, this can be done by Brush, Spray Gun or Aerosol!


***DRY TIME: Air Dry your part 4hrs+ minimum of 80°F THROUGHOUT the 4hrs+


If applying by Brush, dip your brush into the chrome and begin to do very light strokes on your part. Any

chrome that drips off your brush or part can be collected and reused right away. Continue this until you

get the desired finish.


If applying by spray gun, begin by lightly dusting the chrome on your part, Flash 10-15 sec. Apply air to

the chrome for a faster turn.


If applying by Aerosol, spray a very light coat. One light coat will be enough to get your chrome.


***NOTE: Topcoat is not needed if your piece won’t be constantly rubbed with hand oil.