Generator Stator for Yamaha YXZ 1000 R EPS / SS / SE 2019-2024 | B5H-81410-00-00

$229.89
Brand
RMSTATOR
Manufacturer Part Number
RMS010-107076--U--Y
OE/OEM Part Number
B5H-81410-00-00
Manufacturer Warranty
2
condition
New

Generator Stator for Yamaha YXZ 1000 R EPS / SS / SE 2019-2024 | # B5H-81410-00-00

 
KEY FEATURES
 

Brand new aftermarket stator

Direct replacement to your original unit Plug-and-play, direct fit, easy installation

Highest grade lamination materials

Highest grade copper windings, resistant to 200 degrees Celsius

All products shipped are tested

DESCRIPTION

 

Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

Brand new aftermarket Stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Pick up pulsar coil included
  • Connectors included
  • Rubber grommet included
  • All products shipped are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Vehicle models fitment
 

Yamaha YXZ 1000 R EPS -- 2019-2024
Yamaha YXZ 1000 R EPS SS -- 2019-2024

OEM part replacement
 

B5H-81410-00-00

Specifications
 

Dimensions :
Interior diameter : 42 mm
Exterior diameter : 115 mm
Thickness : 23 mm
Length of wires stator to grommet : 200 mm
Length of wires grommet to plug : 1020 mm
Length of pickup coil's wire to grommet : 110 mm

Other specifications :
Number of wires : 5
Number of plugs : 4
Number of holes : 5
Number of poles : 18
Alternator : White to White = 0.5 ohms +-20%
Pickup : Black to Grey = 512 ohms +-20%

instructions
 

Before installing your new stator

  • Check the AC output of the stator
  • Replace any burned or corroded connectors on stator and regulator rectifier
  • Check and repair any melted wiring
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

SHIPPING

 

We deliver 99.4% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.

If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.

Videos