Generator Stator For BMW F650GS / F700GS / F800GS / F800 GS Adventure 2007-2018

$159.0
Brand
RMSTATOR
Manufacturer Part Number
RMS010-103250--M--B
OE/OEM Part Number
12317690427, 12318524422
Manufacturer Warranty
2
Replaces OEM Part#
12317690427, 12318524422
condition
New
Generator Stator for BMW F650GS / F700GS / F800GS / F800GT / F800R / F800ST 2005-2018
 
KEY FEATURES
 

Brand new aftermarket Stator

Plug-and-play, direct fit, easy installation

The quality exceeds the OEM equipment

All products shipped are tested

DESCRIPTION

 

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Brand new aftermarket stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Connector included
  • Rubber grommet included
  • All products shipped are tested

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Vehicle models fitment

 

BMW F 650 GS -- 2007-2012
BMW F 700 GS -- 2011-2018
BMW F 800 GS -- 2007-2018
BMW F 800 GS Adventure -- 2012-2018
BMW F 800 GT -- 2012-2016
BMW F 800 R -- 2006, 2009-2017
BMW F 800 S -- 2005-2008
BMW F 800 ST -- 2005-2013

OEM part replacement

 

12317690427
12318524422

Specifications

 

Dimensions :
Interior diameter : 53 mm
Exterior diameter : 115 mm
Thickness : 24 mm
Length of wires stator to grommet : 123 mm
Length of wires grommet to plug : 508 mm

Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3

Wire to wire resistance :
Alternator : Yellow Between Yellow = 0.4 ohms +-20%

instructions

 

Before installing your new stator

  • Check the AC output of the stator
  • Replace any burned or corroded connectors on stator and regulatorrectifier
  • Check and repair any melted wiring
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Item Delivery

 

Our multiple North American locations, from which we ship our products, allows us to deliver 99.7% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.

If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.