Gas Transfer Siphon Pump Gasoline Siphone Hose Oil Water Fuel Transfer Hand Pump

Product description:
Type:Hand Siphon Pump
Hose Length:2m
Hose Inner Diameter:0.31 inch/8 mm
Hose Outer Diameter:0.4 inch/10 mm
Features:Premium Quality,Must Need,Easy To Use

Fit for:Air, gas, coolant, fuel, petrol, diesel, gasoline, oil, water, and other common liquids.

Suitable for:
Various vehicles without anti-theft filter nets, such as brush cutters, lawn Mowers, snowblowers, hedge trimmers, etc.

Package Includes
1xHose
1 x Suction sphere

2xHose Clips

Product Advantages
Versatility: It can be used to transfer common liquids such as gasoline, engine oil, water and diesel, meeting the needs of various scenarios such as vehicle refueling, equipment oil changing and fish tank water changing. It can be useful whether at home, in the workplace or outdoors.

Convenient and efficient: Manual operation design, no external power supply required, can be used anytime and anywhere. The pump body starts up quickly, can establish siphoning rapidly, achieve efficient liquid transfer, and greatly save time and effort.

Durable material: The pump body is made of durable rubber, featuring excellent toughness and anti-aging performance. The matching PVC transparent hose has a thick wall, is oil-resistant and corrosion-resistant, and is not easy to break or deform, ensuring long-term reliable use.

Wide compatibility: Suitable for various vehicles and small engine equipment without anti-theft filters, such as lawn mowers, snow blowers, hedge trimmers, etc., with strong compatibility.

Instructions For Use
Preparatory work: Confirm the position of the container for the liquid to be transferred and ensure that the liquid source is higher than the receiving container. Check whether the connection between the pump body and the hose is firm and whether there is any damage.

Insert the hose: Insert one end of the longer suction hose into the liquid source (such as an oil tank or oil drum), ensuring it is inserted to a sufficient depth. The shorter end of the discharge hose is placed into the receiving container.

Start the pump body: Manually press the pump body and perform multiple operations until the liquid begins to flow. Some products can be started by shaking. Just follow the product instructions. If the liquid does not flow out, check whether the connection and placement position of the hose are correct.

Control the flow rate: Continuously press the pump body or adjust the liquid flow rate according to the control device on the pump body (such as the squeezing ball). During the transfer process, always pay attention to the liquid flow and the liquid level in the container.

After the transfer is completed, first remove the suction hose from the liquid source and let the remaining liquid in the tube flow into the receiving container. Then remove the discharge hose from the receiving container and properly store the pump body and hose.

Note: Strictly prohibited for the transfer of drinking water, salt water and chemical liquids. Keep away from open flames and heat sources when operating to prevent danger.