Video installation guide: PID-TIMER KIT
Plug and Brew PID - Timer Kit
The PID controller design to maintain the set temperature for brewing
Steam temperature can be controlled by the PID controller and activated by the controller button
or by using the steam switch button and the machine thermostat
The PID controller include an automatic espresso shot timer
Machine warmup indicator
The user can change the digits color
Display orientation landscape or portrait
Display Celsius or Fahrenheit
The timer support Pre-Infusion (When the brew switch is off)
The kit does not need soldering or crimping cables.
Installation time less than 1hr
*The kit will fit Gaggia Classic PRO and EVO, E24 models with four separate white spades connectors at the back of the power switch.
Some EVO models have a single large 4-way "monobloc" plug, for this model the buyer will need to disconnect the spades from the plug and use the spade covers that provided in the kit.
The kit contains:
1- PID - Timer controller
1- AC-DC converter
1 - Solid State Relay
1 - Timer sensor
1- Temperature sensor
1- Water tank light
Cables
Manuals
The PRO model - Include a dimmer
Tools required:
Screw driver
Long nose plier
Hex key (for the boiler bolts)
Disclaimer: The parts are sold AS-IS. The Seller should not have any responsibility for any personal injury, property damages or any malfunction and or voiding your warranty while installing or using any parts of the kit. You the buyer agree to accept all liability associated with the modification of your espresso machine.