Fuel Pump Assembly For 2012-2016 BMW 528i 535i F10 L4 2.0L Sedan

Fitment:
BMW 528i F10 2012-2016 L4 2.0L Sedan
BMW 528i xDrive F10 2012-2016 L4 2.0L Sedan
BMW 535i F10 2011-2016 L6 3.0L Sedan
BMW 535i GT F07 2011-2017 L6 3.0L Hatchback
BMW 535i GT xDrive F07 2011-2017 L6 3.0L Hatchback
BMW 535i xDrive F10 2011-2016 L6 3.0L Sedan
BMW 640i F12 2012-2018 L6 3.0L Convertible
BMW 640i F13 2012-2018 L6 3.0L Coupe
BMW 640i Gran Coupe F06 2013-2019 L6 3.0L Sedan
BMW 640i xDrive F123 2014-2018 L6 3.0L Convertible
BMW 640i xDrive F13 2014-2018 L6 3.0L Coupe
BMW 640i xDrive Gran Coupe F06 2014-2019 L6 3.0L Sedan

Package Include:
1*Fuel Pump

Product Information:

Product Condition: New
Product Type: Fuel Pump
Product Color: As Shown
Product Installation: Direct Replacement
Product Manufacturer Warranty：1 Years
Product Mounting Hardware Included: Yes

How To Replace an Fuel Pump：

• Park the vehicle on a firm, level surface and set the parking brake.
• Find the fuel pump, which on most vehicles is in the fuel tank. Once located, open the fuel cap and have an assistant turn the key to the ON position while you listen at the filler opening. The fuel pump will hum for two to three seconds, if working properly. If no sound is made, replacing the pump may be necessary.
• Find and verify the fuel pump fuse and relay.
• If the fuse is blown, replace it with a fuse of the same amperage. Check fuel pump operation. If the fuel pump works, your job is done.
• If the fuse and relay are functional, check for power and ground at the fuel pump. Removing the fuel tank or the back seat may be necessary. If there is power and ground at the pump, then the pump is faulty.
• Relieve the fuel system pressure. Disconnect the negative battery cable.
• Siphon or drain as much fuel as possible from the fuel tank. Disconnect the filler tube hose and the electrical connection to the pump.
• Support the fuel tank with a jack and a block of wood. Remove any retaining straps or bolts holding the tank to the frame. Lower the tank.
• Disconnect the fuel lines and remove the fuel pump from the tank.
• Compare the new fuel pump with the original to verify that you have the correct part. Install the new fuel pump.
• Connect the fuel lines to the pump. Lift the fuel tank up and install the retaining strap. Reconnect the filler tube hose and the electrical connector.
• Reconnect the negative battery cable. Fill the tank with gas. Conduct a road test to confirm a successful repair.

Note: Before purchasing, in order not to waste your time and bring a bad shopping experience, please carefully check whether your model is on the model list before purchasing.