- [All Halogenated Gas] Freon leak detector triggers on R22, R134A, R404A, R410A, R1234YF and all halogenated refrigerants including HFCs, CFCs,HCFCs and blends.
- [7 Adjustable Sensitivity] Turn the knob to open and choose the sensitivity level. Maximum sensitivity up to 0.21oz/yr, which is enough to self -check auto AC or air conditioning and other.
- [Multiple Indicators] Equipped with Audible and Visual gas leakage indicators and dual battery indicators.
- [Turn On and Use] The electronic refrigerant leak detector response within 3 seconds. Warm up in 6 seconds, the shortest time in gas detectors.
- [7.9-inch probe] A flexible probe allows detections in difficult and hard-to-reach areas. 24/7 US Technician Support via Email and Phone.
Product Description
WJL-6000S is a corona HVAC leak detector with high sensitivity and visualized alarm display. Its adjustable sensitivity ensures automatic and optimal detection status， locating leaks much more accurately. It detects all halogen refrigerants including R134a, R410a, R12, R22, R600a, R404a, R1234yf.
Concentration Indicator
- Once leaking gas is detected, the beep frequency will increase. The more gas leaked, the quickly the buzzer beeps. The first indicator will flash quickly meantime and the other four LEDs will light up accordingly based on the concentration of leaked gases.
- The first indicator indicates both leak and battery level. Blinks in orange mean low battery.
Corona Sensor
It will respond to all halogenated. This includes, but is not limited to:
- CFCs e.g.R12, R11, R500, R503 etc.
- HCFCs e.g. R22, R123, R124,R502 etc.
- HFCs e.g. R134a, R404a, R410a, R1234yf etc.
- Blends such as AZ-50. HP62. MP39 etc.
7 Adjustable Sensitivity
- 1-7 Grade selectable sensitivity
- Maximum sensitivity is 0.21oz/yr
- smaller leak, higher sensitivity grade
- More refrigerants, more rapidly beeps, faster indicator flashes
- Note: 2 beeps per second when the detector is open, 10 beeps per second when leak is detected)
Audible and Visual Alerts
- LED light flash alarm
- Buzzer alarm
- Dual-battery indicators
Green - Suitable for job.
Orange- Need to replace batteries asap.
Flexible Probe
- Around 7.87-inch flexible probe
- Allows detection in difficult and hard-to-reach areas.
- Replaceable sensor tip, which makes the detection more accurate.
4AAA Batteries
- Battery life: about 50 hours
Leak Detector equips with:
- Portable black bag to carry and storage
- Note: batteries NOT included
Technical Specifications
| Sensor lifetime | 24 hours |
| Sensitivity range | 7 levels |
| Maximum sensitivity | 6g/yr |
| Response time | < 3s |
| Warm-up time | 6s |
| Reset time | 2s |
| Refrigerants | CFCs / HCFCs / HFCs /HCs / HFOs |
| Power supply | 4 AAA alkaline battery(not included) |
| Approvals | Compliant to Standard: SAE-J1627, EN 14624 |
| Operating temperature | 0℃-52℃ (30℉ to 125℉); |
| Overall size | 9*2.6*2.6 in |
| Probe length | 7.9 in |
Q: Is it normal for the device to start beeping when turned on?
A: Yes, it beeps upon powering on, and when a leak is detected, the alarm sound becomes more urgent.
Q: Why does the product alarm when not in a leaking environment?
A: 1. Probe blockage, clean according to the manual.
2. Probe damaged, replace it.
3. Circuit board damage. Additionally, Temperature greatly affects sensor.
Q: Why does the product fail to power on?
A: 1.This product does not include batteries, install them before use.
2.Poor contact in the battery compartment.
3.Knob switch damaged.