The Fortuna M3 with a PL2943 housing with a large 7×4 Winstar display is a selective IB metal detector with metal recognition, operating on the principle of induction balance.
Metal discrimination is a numeric and column display of VDI, as in more expensive devices, such as MINELAB, FISHER, XP Metal Detectors, GARRETT (different objects and metal alloys have their own digital value).
The device is multi-frequency, different coils with different frequencies can be used with it.
The ability to disguise and exclude unwanted metal from the search. For example, exclude iron.
Specifications:
Discrimination: VDI number (VDI), synograph.
Goal scoring: 90-tone, 4-tone, two-tone.
Ground balance: manual, automatic.
Ferrite setting: automatic.
Sensor balance care compensation: automatic.
The backlight of the display.
The Winstar 7×4 display.
The firmware is the latest available.
Masks. The ability to mask unwanted metal.
Several search algorithms.
Pinpoint.
Adjusting the device to the frequency of the existing sensor.
Search sensor frequency: 5-20 kHz
Sensor DD 30x32 cm.
Housing PL2943WH (dimensions): 140×100×30 mm.
PL2943WH is a thin instrument waterproof housing made of impact-resistant heat-resistant ABS plastic UL-94V0. Protection against dust and moisture penetration is provided according to the IP65 standard.
The main parameters of this assembly are:
lithium-ion battery 2200 (real capacity) mAh 3.7V; - Not included
collapsible, adjustable rod, the lower part is impact-resistant plastic, the upper part is high-strength aluminum, coated with factory powder paint;
the board is high-quality, factory-made, double-sided, with a protective mask and metallization of holes.
On nutrition:
1. In full configuration, the unit is powered by 3.7 V (18650 lithium battery of 2200 mAh- Not included).
2. If the power supply is made its own, then it can be from 2 to 12 V.
3. The power connector for the plug is 5.5 x 2.1 mm.
4. Pinout of the sensor connector is as follows:
1 - RX +
2 - RX -
3 - Screen
4 - TX +
5 - TX -
5. Sensor frequency: 7.2 kHz (default).
6. Spacing between TX-RX: 1.7-1.8 kHz.
The detection range of the Fortune M3/ Fortune M3 metal detector by air:
DD 320x300 mm 7 kHz / current 86 mA / frequency range 1.8 kHz / sens 6.
5 kop of the USSR 1981: 41 cm;
3 cop 1910: 37 cm.
On average, the detection range by air = 32-57 cm per coin;
large metal objects up to 150-200 cm.
The scope of delivery:
Collapsible rod.
The charger.
Sensor.
The functional unit of the device.