Supported vehicle list: https://fortin.ca/en/products/evo-series/evo-one/vehicles.html
Built-in functions
Built-in features for installations.
-
3x Remote starter
-
Built In Alarm System
- Product Features
- 3 x On-board LEDs for simplified programming and diagnostics.
- 1 x Preloaded firmware for maximum compatibility. [1]
- 1 x Harness part bag.
- 2 x 2-way datalink port for data-to-data (RS-232) communication with compatible external devices such as smartphones & GPS telematic units. [2]
- 1 x All EVO-ALL I/O's for full fledge Data and Analog vehicle functions coverage. [5]
- Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly.
Product Specifications
- 5 x High power Onboard relay.
- 3 x CAN-Bus controllers.
- 3 x General purpose controllers (J1850, LIN, Class 2, encrypted key etc.).
- 1 x On-board relay (DPDT).
- 1 x Analog controller 0-12VDC @ 20mV steps (Passlock, Parking lights, MUX).
- 10 x Data I/O controllers.
- 1 x Dual zone shock sensor input.
- 2 x Datalink RS232 ports. [2]
Parts included
- 1 x EVO-ONE control module (firmware preloaded). [3]
- 1 x Warning label. [3]
- 1 x Hood Pin switch.
- 1 x 20 Pin general purpose harness. [4]
- 1 x 4 Pin Fortin 2-way data-link harness. [2]
- 1 x 6 Pin High Power Harness. [4]
Legend
- [1] A firmware update may be required for the module to support newest vehicles.
- [2] Using the 2-way datalink port with an equipped telematic unit greatly increases range and user integration.
- [3] Updated firmware and installation guides are posted on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.
- [4] Secure Clip Harness.
**For select vehicles, this module may need to be progammed with the flashlink2 updating cable (purchased seperatly). For other select vehicles, a key may be required to be wrapped and used with module. Please see https://fortin.ca/en/vehicles/ and enter your vehicle info then check the "compatibility notes field" and the "required accessores" to see if they mention the key or the fashlink2 as a required accessory. If neither are mentioned, this module will work out of the box for your vehicle.
