Note:
The brake pedal's flatter profile has less flex through the pedal when applied but it cannot be adjusted low enough to be used with lowered footpegs. The pedal is not recommended for use with lowered footpegs!
Installation Suggestions:
Customers using a bolt-on water pump protector or a skid plate with a protector over the pump should consider the street tip, as part of the tip will be covered with aftermarket water pump protectors.
The Facts:
You no longer have to deal with the Tenere 700's mushy rear brake! Our brake pedal addresses the pedal issues. Install one on your bike and feel the difference!
Our brake pedal has a modified leverage ratio, which activates your rear brake with less pedal travel and less ankle deflection. This results in a crispier, more "sporty" brake feel.
Corrected leverage ratio, reducing pedal travel by about half compared to stock.
Durable 6.4mm thick 304 stainless steel construction.
Straighter shape to reduce pedal flexing while braking.
Brass bushings to reduce slop in the pedal main pivot point.
Grippy, replaceable stainless steel brake tip.
Offset clevis to correct the master-cylinder pushrod angle.
Black powder-coated finish.
The pedals flex far less than the mild steel pedal.
Offer Enduro or larger Street tip.
Fitment:
For Yamaha Tenere 700 2019-2024
