usa SHIPPING 6 layers 1TB MAC MINI SSD Applicable to MAC Mini M4 only( not fit or Mac mini M4 Pro) Model Expand Hard Drive Upgrade with tools Feature: Condition: Brand new high quality Layers: 6 Compatible with model: Mac Mini M4 only(not fit for Mac mini M4 Pro Warranty:36 months , if there is any problem of the ssd, please contact us by ebay for a replacement or a fully refund within 36 months you can visit the youtube as link folloiwing below about how to install the new ssd to your Mac mini M4 https://www.youtube.com/watch?v=81HS5QgmykM
MINISSD high-performance hard drive with Mac mini M4 chip model, the following are the detailed information of the product: 1. Product name and applicable models 1: Product name: For Apple Mac mini M4 SSD Applicable models: Only support Mac mini (M4 chip) 2. Product features High-speed read and write: Sequential read and write speeds up to 2900/4200 MB/S. In Disk Speed Test 1G mode, the write speed of 1G file is 4.6 - 4.75 GB/S, and the read speed is 2.8 - 3.01 GB/S; the write speed of 5G file is 3.18 - 3.35 GB/S, and the read speed is 2.92 - 3.05 GB/S. Using Thunderbolt 4 for data copy test, 246.24GB file is copied in about 1 minute, and the actual SSD write speed is about 3000 MB/S. Original material planning: The material planning of the hard disk board is the same as the original factory, using Jiali Chuang 04061H - 3313 stacked structure solution, differential signal impedance is controlled at 85ohm (±10%), 1:1 native impedance design. Lightweight and easy to install: Thin and compact design, providing a lightweight solution, the finished product can be installed on the computer within five minutes. Support plug and play (finished product), but the purchase of semi-finished products requires welding hard disk particles. Multiple capacities available: Supported capacity is 256GB/512GB/1TB/2TB, the product color is matte black, and supports PCIE 4.0 ultra-high-speed protocol transmission. High stability: The product has undergone multi-stage stress testing, is very stable, fully compatible with MacOS, and has no restart problems after installation. 3. Installation process (standard installation process) Removing the back cover of the device: When purchasing a semi-finished product, professional maintenance personnel need to weld particles before installation (the picture shows a semi-finished product without particles). Tighten the screws after installation: After installation, tighten all screws and close the back cover of the device. Pay attention to the installation notch position. Incorrect installation may damage the hard disk. Download dedicated flashing software: Download Apple Configurator from Apple's official App Store and open the software. Completely turn off the power of the extended Mac device, first plug the data cable into the Thunderbolt port and connect to another Mac computer, then press and hold the power button and plug in the power cable. At this time, you will be prompted to enter DFU mode. Start flashing the system: Right-click and select "Restore" to start the fully automatic flashing process. The whole process takes about 20 minutes and does not require attendance (in some areas, due to network or Mac computer configuration problems, it may take multiple flashes to succeed. This does not mean that it is a hardware problem). 4. Frequently Asked Questions What particles are used for the hard disk board? : Use "new particles" or "disassembled particles". Because new particles are difficult to obtain, new particles will be installed first. If there are new particles, they will be installed first. If not, choose to use high-quality disassembled particles (disassembled particles come from iPhone/iPad/Mac). No matter what kind of particles are used, they will be strictly tested before delivery. At the same time, consumers will be informed that disassembled particles are used and some fees will be waived. If they cannot accept it, they will not be shipped. Can it be turned on directly after installation? : This Mac uses a different hardware architecture from the old one. It cannot be started after direct installation. It needs to be flashed with another Mac before it can be used. How is the read and write performance? : The speed is the same as the original Apple Mac mini M4 chip SSD. How is the stability of the small board? : The product has undergone multi-stage stress testing and is very stable. Is there a restart problem after installation? : It is fully compatible with MacOS, no restart problem, please feel free to use it. Can novices install it at home? : It is recommended to buy a finished SSD. The installation is very simple. If you really don’t want to install it yourself, you can mail it for free. This MINISSD high-performance hard drive provides Mac mini M4 users with a high-speed, stable and easy-to-install storage solution. Users can choose the appropriate capacity and installation method according to their needs.
Payment: Shipping: ( Please note: business/working days: NOT including the weekends nor the holidays ) we will ship it from USA, it will take 3-5 business days around to USA Contact us Please contact us via ebay message if there is any problem, please allow us to reply you within 24 hours please be free to contact us, we must try our best to fix this problem asap.
Terms of sales 1:We guarantee that our products has 36 months Warranty, During the periods, we will repair or replace any defective product |

Powered by SoldEazy