For Jeep Grand Cherokee 08-10 Set 4 Tire Pressure Sensor TPMS 56029481AB 433MHz

Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide
$23.99
Valve Core Torque
3.5 in-lbs (0.4 Nm)
Simplified Relearn
Auto-relearn
Manufacturer Warranty
1 Year
Custom Bundle
No
Manufacturer Part Number
56029481AB, 56029359AB, 68406531AA, 56029359AC
Placement on Vehicle
Left, Right, Front, Rear
Modified Item
No
Screw Torque
11.5 in-lbs (1.3 Nm)
Brand
Azpartspro
Type
Sensor
Interchange Part Number
56029481AB, 56029359AB, 68406531AA, 56029359AC, 56029359AA
Frequency
433 MHz
Sensor Quantity
4
UPC
710050449772
condition
New

Store category

Sign Up Now !

You may also like

For Jeep Grand Cherokee 08-10 Set 4 Tire Pressure Sensor TPMS 56029481AB 433MHz

Product Description

Ship from the nearest one of our warehouses in America.

Please check the part number, Fitment Vehicle and Listed Pictures above make sure whether it fit the part you want to replace or not.

Welcome to contact us if you have any question or problem. We will reply within 1 business day.

 

Description:

100% Brand New & High Quality

The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle, need activate them by scan tool or "re-learning". Right Activation tool is important

Professional Installation is Highly Recommended.

 

Specifications:

Battery Life: ABOUT 5 YEAR

Frequency: 433 MHz

 

Interchange Part Number:

56029481AB, 56029359AB, 68406531AA, 56029359AC, 56029359AA, 68001696AA, 28434, 56029481AA

 

Fitment:

Fit for

DODGE RAM 1500 PICKUP 2009

JEEP COMMANDER 2008-2010

JEEP GRAND CHEROKEE 2008-2010

 

*Note: Please refer to compatibility chart for details. Please confirm the Part number and compare old parts before purchase. If you are unsure, please message us with your 17-digit VIN # (vehicle identification number) before buying to avoid unnecessary return.

 

Package includes（as pictured）:

4x TPMS Tire Pressure Monitor Sensors

This is non-original aftermarket product. Scan Tool is not included.

 

Installation Process

1. Loosen the tire: Remove the valve cap and core and deflate the tire.

2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.

3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.

4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.

5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.