For Detroit Diesel Series 60 Engines Cam Gear Retaining Tool J-35652-A M30116

Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide
$36.99
Brand
Unbranded
Part Number
J-35652-A
Type
Cam Gear Retaining Tool
Fitment
For Detroit Diesel Series 60 engines
Number of pieces
1
Color
Black
Warranty
1 Year
condition
New
For Detroit Diesel Series 60 Engines Cam Gear Retaining Tool J-35652-A M30116
Fitment
 
This camshaft drive gear torque holding tool fits for detroit diesel 60 series engines.
 
Direct Replacement
 
Alternatives to J-35652-A.
 
Function
 
This tool is used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt.
 
Great Design
 
The tool is designed to be installed in the gearbox and mesh with a shock-absorbing hole in the camshaft drive gear.
 
How to Use
 
1. Insert the shoe of the camshaft drive gear torque holding tool, J 35652-A part of J 35652 , through a lightening hole of the camshaft drive gear.
2. Using the 3/4 in. square hole in the center of the crankshaft pulley, bar the engine over slightly to position the camshaft drive gear holding tool so that the bolt holes in the holding tool align with the access cover bolt holes in the gear case cover.
3. Install the camshaft drive gear torque holding tool, J 35652-A part of J 35652 to the gear case, engaging one of the lightening holes in the camshaft drive gear. Use two of the access cover bolts to secure the tool to the gear case.
 
Package included
 
1 * J-35652-A Cam Gear Retaining Tool.
1  1

Installation of Camshaft Drive Gear Torque Holding Tool:

1. Insert the shoe of the camshaft drive gear torque holding tool J-35652-A, through a lightening hole of the camshaft drive gear.

2. Using the 3/4 in. square hole in the center of the crankshaft pulley, bar the engine over slightly so that the bolt holes in the holding tool align with the access cover bolt holes in the gear case cover.

3. Install the camshaft drive gear torque holding tool J-35652-A to the gear case, engaging one of the lightening holes in the camshaft drive gear. Use two of the access cover bolts to secure the tool to the gear case cover.

4. Using a long 3/4 in. drive breaker bar and a 27 mm impact socket, remove the camshaft drive gear mounting bolt. Discard the bolt.

5. Remove camshaft drive gear torque holding tool J-35652-A from the gear case cover.

6. Insert a clean shop towel into the gear case opening to prevent removed bolts from falling in to the gear case.

Notice: Do not allow bolts or the shop towel to fall into the gear case. Failure to remove loose bolts or the shop towel from the gearcase may result in severe gear train damage at engine startup.

7. Remove the three (current) or two (former) camshaft thrust plate mounting bolts carefully to avoid dropping them into the gear case.

1. All major credit cards are accepted through our secure payment processor Payoneer.

2. Please make sure your Shipping address is correct before you pay, cause it cannot be changed once the order shipped out.

Please read the shipment and payment detail carefully before you bid.
1. Return to us within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.
3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.

We apologize for the late reply during the holidays.Please contact us via ebay using"Contact member".

We will respond within 1 business day or less. Please include your ebay item number or order number in all communications.

PushAuction