This pool filter motor works efficiently with its single-speed design. The motor is the perfect addition to your filter pump system for enhanced performance. Equipped with the ability to withstand ambient temperatures up to 50c and constructed with an open drip-proof enclosure, the square flange pool filter motor is sure to last.
Part Number
USQ1102
Specifictions
Single Speed
115/230 Volts
15/7.5 Amps
1.25 Service Factor
Threaded Shaft
48Y Frame
3450 RPM/60 HZ
Installation Steps
1. Disconnect Power: Ensure the power is turned off and disconnect the power lines.
2.Remove the Old Motor: Disassemble and remove the old pool motor, taking note of the connections and labeling them if necessary.
3.Install the New Motor: Install the new USQ1102 motor in the same position, ensuring a secure connection with the pump.
4.Connect Power: Properly connect the power lines according to the voltage requirements of the motor.
5.Test Run: Restore power and test the operation of the new motor to ensure everything is functioning correctly.
(Professional installation is highly recommended.)
Please check the part number and illustrations carefully to ensure that it fits your model. If you are not sure, please contact us and we will respond as soon as possible.
★Professional Seller★ ☑Quality Assurance☑ ✈︎Fast Shipping✈︎ ☺Efficient Service☺
On May 5, 2024 at 23:31:30 PDT, seller added the following information: