For 2011-2016 Scion tC Qty 2 Hatchback Hatch Lift Supports Shocks Struts

Item ​Description:

* The inflatable lifting bracket is a type of pressurized shock absorber, which is often used to support the hood, hatch, trunk, rear window glass, etc. The longer the use of these pneumatic hydraulic rods, the worse the power, and they need to be replaced in time. Gas springs are also called engine hoods, hatches, lift doors, tailgates, rear window shock absorbers, struts, dampers, hydraulic cylinders, and arms. Installed in a specific car and a specific location.

Item Features:

1. Special treatment makes the surface of the piston rod have strong corrosion resistance
2. Minimal friction that produces the lowest tensile force.
3. Long life cycle.
4. Protection against vibration and light side forces.
5. Reference Part Number:PM3236 
6. Installation position:Trunk

Fitment Information:

2011-2016 Scion tC 

What are the symptoms of a bad Lift Support?

* Symptoms of Bad or Failing Hood Lift Support Shocks:

1. Hood slowly closes on its own--The seals can wear out and begin to leak slowly over time. Once enough pressure has leaked from cylinder it will no longer be able to properly hold the weight of the hood, which will cause it to slowly lower until it eventually closes.
2. Hood suddenly closes on its own--A faulty lift support may have worn seals that may appear to be able to support the hood, only to suddenly give out, causing the hood to slam shut.
3. Hood does not stay up at all--If all of the pressure leaks from the lift support it will not be able to support the weight of the hood at all, and the hood will close as soon as it is opened.