|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Description
Our window regulator offer value without compromising quality. It with premium material and solid construction, ensures high strength and reliability. They direct fit -No missing holes, hardware or mounting brackets. It has been 100% tested for RPM, rotational direction, amperage and torque before shipment.
Highlights include
- Built to meet or exceed original equipment performance
- Simple electrical plug assembly, no wire splicing necessary
- High-quality steel and plastic compounds for greater durability
Your "Right Part" Checklist
Use the compatibility chart to identify your vehicle.
Visually compare the part you are replacing with our pictures.
Match reference numbers from the Item specifics section above.
Find the year,make, model, engine and trim in vehicle application to ensure.
Part Number
Replaces dealer part number:748-568, 55360034AJ, 68059646AB, 55360034AA, 748-569, 55360035AJ, 68059647AB, 55360035AA
Fitting for the following vehicles
2002-2007 Jeep Liberty with Motor
Package
1 pair of Window regulators with Motor in a box
Install the window regulator as follows:
Part1 Disconnecting the Window from the Motor
1.Remove the interior door panel.
2.Gently remove the plastic door cover.
3.Locate the window mounting bolts.
4.Move the window if necessary to access the bolts.
5.Remove the bolts while a friend supports the window.
6.Raise the window up into the door frame.
7.Use masking tape to secure the window in place.
Part2 Disconnecting the Motor and Regulator
8.Remove the window regulator bolts.
9.Locate and remove the window motor mounting bolts.
10.Disconnect the motor wiring harness connector.
11.Remove the motor and regulator through the access port.
12. Connect the regulator to the new motor.
Part3 Installing a New Power Window Motor
13.Slide the new motor and regulator back into place.
14.Replace the mounting bolts.
15.Reconnect the electrical connector.
16.Remove the masking tape and lower the window back down.
17.Insert the window mounting bolts.
18.Reinstall the plastic liner and interior panel.
Warranty:
This product is covered by our 1-year warranty.
If a failure occurs due to a manufacturing defect during the expected use, we will replace the part free of charge
| Item Specifics | |
|---|---|
| Brand | ignitionco |
| Manufacturer Part Number | VA817119P |
| Fitment Type | Direct Replacement |
| Surface Finish | Smooth |
| Placement on Vehicle | Rear Left Right |
| Operating Mode | Electric |
| OE/OEM Part Number | 748-568, 55360034AJ, 68059646AB, 748-569, 55360035AJ |
| Type | Window Regulator |
| Motor Included | Yes |
| Surface Finish | Smooth |
| Product Fit | Direct fit |
| Attachment Type | Bolt On |
| Operating Mode | Electric |
| Housing Material | Steel |
| Gear Material | Plastic |
| Frame Material | Metal and Plastic |
| Window Mechanism Part | Window Motor/Winder Part |
| Number of Pieces | 1Pair |
| Fitment Type | Direct Replacement |
| Other Part Number | Window regulator /Window lift |
| Superseded Part Number | Rear Driver Passenger Side Replacements |
| Custom Bundle | Yes |
| Bundle Description | 2 Power Window Regulator |
| Installation Instructions Included | No |
| Manufacturer Warranty | 1 Year |
| Fitment(Note) | Verify this part fits your vehicle using the compatibility chart |
| Modified Item | No |
| Package Contents | 2 Power Regulator |
| Packaging Type | Box |
| Mounting Hardware Included | No |
| Weight | about 7 lbs |
| Surface lubrication | Yes |
| Package Size | 65.50 * 22.00 * 7.00(cm),65.50 * 22.00 * 7.00(cm) |
We usually ship within 1 business day of receiving your payment.
We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.
We only ship to Paypal confirmed address, please make sure that the address is correct before you check out.
We accept to pay by Credit Card, Direct Debit, VISA, eCheck, or other methods, please kin