Product Description
DIY Portable Mini Spot Welder Machine 8-24V Voltmeter Fit For 18650 Lithium Battery
Product Characteristics
High Quality MOS Tube:
Using 6 MOS tubes, the peak current can reach 1800A, support 0.1-0.25mm nickel solder, solder joints are more solid and beautiful.
High Precision Power Output Design:
99-speed adjustable output power, high-speed single-chip microcomputer, intelligent program, real-time display of battery voltage, to achieve more accurate welding, suitable for continuous welding of nickel plate and spot welding on nickel plate.
3-Digit LED Digital Display:
With 3-digit display digital tube real-time display of liquid level position function, not only can display the current liquid level position, but also can detect the battery voltage, increase the fun of spot welding.
Both Spot Welding Machine And Voltmeter:
The built-in 12 is a high-precision ADC, the voltage measurement accuracy can reach 0.01, the voltage can be measured from 8V-24V, and the voltage is automatically displayed when connected to the power supply. In the standby state, the digital tube alternately displays the liquid level position and the power supply voltage every second, and exchanges once every second.
When the display is displayed as: d+ two digits, representing the gear display, such as d99, representing 99.
When the display shows three digits such as: 12.6, it means that the power supply voltage is 12.6V; If the voltage is lower than 10V, the decimal point accuracy will be displayed, and if it is higher than 10V, the decimal point accuracy will be displayed.
3 Working Modes:
You can switch between default power mode, enhanced power mode, and super power mode.
1. P1 is the default mode and is suitable for most batteries.
2. P2 is an enhanced power mode and is suitable for batteries with poor performance.
3. P3 is a super power mode, suitable for batteries with very poor battery performance.
Under normal circumstances P1 can, if the power supply battery is relatively poor, P1 can not be welded, you can adjust to P2 mode, if P1 can be welded, do not adjust to P2 mode, easy to burn the motherboard; If P2 mode or mortgage can not be, you can try P3 mode, less than a last resort, do not use P3 mode, P3 mode improper use will burn the motherboard.
Adjustable Pen Delay:
After long press the Settings key to enter the Settings menu, you can set two kinds of pen delay.
1. AU0: indicates no delay, the pen drop can output current immediately, suitable for customers with hands-on ability to install foot tap switch.
2. AU1: indicates a delay of 1 second and output current after the pen drops for 1 second. The default value is AU1, which is suitable for automatic trigger of the pen.
Product Specification
Condition: 100% Brand New
Material: ABS
Operating Voltage: 8-24V
Working Current: <20mAh
Peak Welding Current: 1800A
Standby Power Consumption: <0.5mAh
Welding Thickness: Nickel Sheet, 0.1mm-0.2mm
Limit Temperature: 175°C
Breakdown Voltage: 40V
Internal Conduction Resistance: 0.53 MΩ /min
You Can Choose One Of The F