Fluke 773 Milliamp Process Clamp Meter 4 to 20 mA Signals Provide Loop Power

Fluke 773 Milliamp Process Clamp Meter DMM Volt Test MultiMeter,100% Brand New Fluke 773 Milliamp Process Clamp Meter F773 DMM

If you need more time in your busy day check out the Fluke 77X mA Clamp Meters. They are designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

 

DC voltage measurement to verify 24 V power supplies or voltage I/O signals

Source dc voltage to test input devices that accept a 1 to 5 volt or 0 to 10 volt signal

Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp

mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal

Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp

Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals

DC voltage measurement to verify 24V power supplies or voltage I/O signals

mA output linear ramp or 25% step output

Source 4 to 20 mA signals for testing control system I/O or I/Ps

Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters

Automatically change the 4 to 20 mA output for remote testing

Power saving features, auto-off, backlight timeout extend battery life

Hold function captures and displays changing measurements

Measure 4 to 20 mA signals with in-circuit measurement

1 x Four AA alkaline batteries (installed)

1 x Soft carrying case

1 x TL75 test leads

1 x AC 72 detachable clip

1 x TL 940 mini hook test leads

1 x Instruction sheet

1 x Hanging tool with hook and loop strap