Filter Element, 0.005 Inch, Reusable, Auto Klean, 3M Cuno, Unused
This is an unused Auto Klean brass filter element made by Cuno (3M), NSN number 4330 00 287 3373. This features multiple brass disks stcked very closely with a brass wiper which cleans the surface by combing the element when the cartridge is rotated.
- This can fit in some 3M Model G or EF G filter housings.
- Spacing of disks: 0.005 inches
- disk diameter: 1.25 inches
- disk stack length: approx 3.33 inches
- Overall length of cartridge: 4 inches
- Overall length including wiper shaft: approx 6.7 inches
- For fuel or oil
- Alternate part numbers:
- 104107AA
- 45091701
- NSN number: 4330 00 287 3373
- Alternate NSN number: 4330 00 399 3364
Specifications:
- MFG: Cuno
- Model: 104107AA
- Serial:
- Volts:
- Amps:
- Phase:
- Year:
- Drive:
- Controls:
- Manuals:
- Air:
- Weight: Lbs
- Condition: Unused
- Length:
- Width:
- Height:
- All dims inches unless otherwise noted
- Inventory #: 2904
- Location: U-R8B
WE SHIP INTERNATIONALLY contrary to the Ebay statement that says we only ship to united states.
Contact us for shipping quotes
International purchases: A $40 documentation processing fee will be added to total purchase for items under $150.
Our company return policy is that our description is guaranteed and we will accept returns in the event an item is mis-described.
When communicating with us please use your own email address. We want to know who we are communicating with and we cannot identify specific emails in our inbox using the ebay email system.
Send emails to heritageequipment AT gmail . com
The new ebay buyer protection program has inspired us to offer all of our items “as-is”.This does not mean that you are buying a machine with deficiencies, known or unknown. What it means is that some of our items will be tested and will include the results in the description and others will be untested but described accurately to the extent that is possible without actually powering up the machine. In addition to this written description you will have the opportunity to view high quality photos of the item. With these two sources of information you will have as much information as possible without being physically here to inspect the machine. Feel assured that we will make a diligent effort to give you an accurate description of the equipment.
As a buyer you should be aware that you are buying an expensive piece of equipment at a greatly reduced price and as such you may have to deal with certain unknowns and defective components which were not known and could not be known without full scale setup and operation of the machine. Our experience in dealing with many specialized pieces of equipment has proven this to be a rare occurrence however it is a risk inherent in buying used equipment. The very few times we have had to deal with these issues we have been very helpful in resolving the problem.
