Save money replacing your old worn out front pipe, down pipe or cat pipe with this flexi pipe. Also designed as a modification/enhancement for your sports exhaust. It can absorb sound and vibration. This flexi can withstand temperature of over 700 degrees.
This flexi pipe replaces the orignal OE flex on your system.
If your flex is damaged or blowing you can £ave over £50 by replacing only the flex and not the whole exhaust.
- Stainless Steel end Pipes
- Rotary Welded for Smooth Even Weld
- Clamps Included
Beware Inferior Quality
Some other ebay sellers offer a similar but inferior quality flexi pipe with 2 extra connectors. They don't use I-lock flexes like ours, they use lined or braided flexes which definitely will not last as long. They advertise this as a standard size flexi to suit all vehicles. They expect you to cut connectors to suit correct length required for you to replace your broken flex. You will then have to weld the connectors into place, even though they provide clamps and says can be used as a clamp on flexi. 9 times out of 10 you will have to get part welded. Also there are only 3 different diameter sizes for other sellers flexi's. If your exhaust pipes are not the same diameter as one of the 3 options, then you can't get it to fit. Also flex for your car might require a small length flex or a long length flex. These other inferior flexes will have no chance of fitting then. If you took this to a garage and got them to fit it, labour costs alone would be £40 +
Will This Work For My Car?
Simply check the comprehensive list of all the applications this replacement flex fits, and if your car is in there and you have the OE exhaust on your car then fitment is guaranteed. Alternatively send us a message with your cars registration and we will confirm it for you. As simple as that.
How Does it Work?
When you go to a garage and they tell you your flex is blowing they will try to sell you a whole new section of your exhaust. Replacing the flex with one of our Replacement Flexi-Pipes is cheaper and better in the long run. After-market exhausts are made from inferior quality material and will need replacing in approximately two years. Because our flexi-pipes come with stainless steel collars you get to keep your OE exhaust with a useful life of 10-15 years, and save yourself some money.
Can I Fit it Myself?
The simple answer is - yes :) Fitment involves cutting out the old flex with a hacksaw or a cutting disc for your angle grinder, cleaning up the edges and clamping the replacement into place. Alternatively most garages can carry out this work for you.
High Quality Stainless Steel
