Fault & Not Work 6KW,8KW,10KW,12KW,15KW,16KW,20KW,26KW LF SP PSW Power Inverter

Note!!!        Very Important!!! 

this is Fault & Not Work Units which Return by customer,we can not confirm the status of it,maybe the outside case a little damage during the transport also,generally it not work but just need to replace the driver board or mosfets,if you know electrical then it is easy to replace,we do not accept return for refund,if you need electrical repaire support,you can just contact with us,the repaire parts not free,you can test on your side then purchase the repaire parts from us if need,thanks

• Fault & Not Work 6000W LF Split Phase Pure Sine Wave Power Inverter DC24V / AC110V,220V 60Hz

• Fault & Not Work 8000W LF Split Phase Pure Sine Wave Power Inverter DC12V / AC110V,220V 60Hz

• Fault & Not Work 8000W LF Split Phase Pure Sine Wave Power Inverter DC24V / AC110V,220V 60Hz

• Fault & Not Work 10000W LF Split Phase Pure Sine Wave Power Inverter DC12V / AC110V,220V 60Hz

• Fault & Not Work 10000W LF Split Phase Pure Sine Wave Power Inverter DC24V / AC110V,220V 60Hz

• Fault & Not Work 10000W LF Split Phase Pure Sine Wave Power Inverter DC48V / AC110V,220V 60Hz

• Fault & Not Work 12000W LF Split Phase Pure Sine Wave Power Inverter DC24V / AC110V,220V 60Hz

• Fault & Not Work 12000W LF Split Phase Pure Sine Wave Power Inverter DC48V / AC110V,220V 60Hz

• Fault & Not Work 15000W LF Split Phase Pure Sine Wave Power Inverter DC24V / AC110V,220V 60Hz

• Fault & Not Work 15000W LF Split Phase Pure Sine Wave Power Inverter DC48V / AC110V,220V 60Hz

• Fault & Not Work 16000W LF Split Phase Pure Sine Wave Power Inverter DC48V / AC110V,220V 60Hz

• Fault & Not Work 20000W LF Split Phase Pure Sine Wave Power Inverter DC48V / AC110V,220V 60Hz

• Fault & Not Work 26000W LF Split Phase Pure Sine Wave Power Inverter DC48V / AC110V,220V 60Hz

• Seller's Command:

  1.Note: this item is DC Input, usually when you use big power,the best Input voltage is ,because the amp will become small, will not cause the inverter getting so hot, if inverter not hot, the efficiency will arrive 2-3%,means can go to 92-94%, also your battery bank can keep very good performance! watt=volt x amp, once your voltage getting high, your amp will become small.

  2 .this inverter will come unversal plug with big amp socket, all the country can be used!.

  3.this inverter is LF inverter, we called low frequency, with big transformer inside(around 12kgs),this design just for the heavy duty appliance, like pump, motor, freezer, grinder, microwave, heater.

  I sold the inverter about 10more years, most of is HF INVERTER(made by mosfet), even it's 5000w inverter,

  still get some feedback from customers side, they say why i use pump, grinder can not turn it on? or use some weeks, the inverter dead, because some heavy appliance maybe just 500w, however, when turn it on need 10-15times conitnue power(5kw-7.5kw) to start it, in this moment, very easy to damage the mos-fet, it happened all the time, i am very upset about this situations & no idea to real solve the problem. 

  One day my friend who is engineer to charge the power source about the airplane & train, he told me can think about the LF INVERTER, as all the airplane, train, big board, RV CAR, they are set up this inverter with no problem.I go to find how this inside made, the major point is big transformer, made by a wide copper, very strong enough 100times than HF INVERTER(made by mosfet) to produce smooth power & of course, even 5-8years after, the transfomer still working good!

  4. you may see a lot of inverter in the marketing for sell, price will be hurge different, 80% is HF INVERTER, because its' handy 3kw around 5-6kgs, 5kw around 10kgs, but before you make a choice, just asking can this run microwave, compressor, pump?  You may not get very satisifed answer, that's the big difference!

  What i recommend is just spend your money for power source at 1 shot can real useful, real match your power source demand.

  5.TURBO POWER AUTO DETECTION: 

   when you use some motor, engine, pump, some need 10 times surge power require, in this moment, the IC will auto offer more amp come from the battery with 2 times standby power to turn on the heavy appliance, after turn it on, the amp will come to normal voltage & amp.

  6.  Inside big transformer is made by Taiwan factory, material come from Japan, that's bring the inverter efficiency come maintain to 92% at least.

  7.  Inside mosfet from Germany, not made in China, that's making sure the inverter for long time use, will be no problem, temperature can stay around 60℃.

  8. this also including big battery charger, also you can do it like UPS, inverter, charger, almost offer your all power source demand.

  9.  UPS function: 

  a.  usual UPS function is build-in battery, only can run about 5 mins.

  b.  however, this inverter can decide how long you want to use, the more high capacity battery you connect, then you can use whatever you want

  c.   Just connect the AC power cord to your home AC source, when out of AC power, the inverter will auto switch to inverter function, this can be your back power. 

  10. LCD meter function: 3.5" LCD display, watt, voltage, amp, very clear to understand your appliance situations.

  1). AC Output watt :0 Watt (Max display power 15KW,can display running power less than 1W )

  2). AC Output Volt : 0 volt (Max display volt 270V)

  3). AC Output Amp : 0 Amp  (Max display amp 55A)

  4).  Total Operation time :0-60000 hours（Operation time: 0～59 minutes to 24 hours to 2500 days ）

  5).  Electricity consumption: 0～1000000 kwh

  6).  Electricity cost: 0～10000000 $

  7).  Total operation time , electricity consumption and electricity cost can clear

  8).  Can set up power ,the meter will alarm when reach reserve power

  9).  Can set up the cost

  10).   Refresh rate: one time 0.5 seconds

  11).   Messurement Accuracy: ±1%

  
  

  Newest Version Function 1. Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful. 2. Hz Selection (50Hz, 60Hz, automatic selection) Hold down the button for 2 seconds, the machine prompts Hz has been switched, release the button,  after 2 seconds, if hear 2 beeping sounds, then the frequency selection was successful. 3. DC alarm voltage adjustment (±0.5V) Adjust counterclockwise to reduce DC alarm voltage Adjust clockwise to raise DC alarm voltage 4. AC output voltage adjustment (210V-240V or 105V-135V) Adjust counterclockwise to decrease AC output voltage Turn clockwise to raise the AC output voltage 5.ATS: If the machine is connected to the battery and home mains at the same time, the machine will use Inverter function first. When the battery voltage is lower than 10.5V(for 12V inverter) or 21.5V(for 24V inverter), the machine will automatically switch to charging mode. In charging mode, the AC output will be from home mains. When the battery voltage rises to 14V(for 12V inverter) or 28V(for 24V inverter), the machine will automatically convert back to Inverter function, when switching the function will not affect the use of appliances. 6.UPS： If the machine is connected to the battery and home mains at the same time, the machine priority to use the home mains electricity, if the home mains electricity is failure, the machine will be automatically converted into Inverter function to run the home appliances.  7.POWER SAVE ON : If you only connect battery with load, ac cable unconnect, when you switch to battery charger mode, this means is power save mode on, in this moment the condition as follows: The inverter will go to sleeping mode , no load current is 0 AMP, every 3secs, the inverter will detection itself, after the 3sec, amp will go to 3amp(stand by power, time: 1sec, then back to sleep mode, amp is 0),  the inverter will repeat the situation, until you switch to power save off(inverter on, down side) some customer need use refrigerator ，can switch to power save on mode, as refrigerator only will work every  half an hour or one hour  ,  but inverter stay in power save function, no load current is 0amp , can save power. What's the different between High Frequency and Low Frequency? HF power inverter have limit for runing appliances with motors ,engines,special light and TV LF power inverter available for sensitive load,accept generator’s energy output,high power factor,and follow our warning label ,it would not have any problems. Feature: Ideally suitable for Journeys, Camping, Tents, Boat Trip, Working on the way and everywhere, where is no electricity! Simply connect our with Battery. For example as in a Car, Motorcycle, Camper or Boat and use electrical appliances.         Possible Uses: Equipment:  Computer, Latop, Monitors, Fax Devices, Scanner Entertainment Electronics: TV, DVD-Player, Play Consoles, Hi-Fi-Systems, Music Instruments, Satellite Decoder Household Appliances: 100w Fans, Electric Shaver, etc... Kitchen Devices: Toaster etc... Electrical Tools: Drill, etc... Because some appliances have instant power or motor, when use our power inverter must pay a attention for some points as follow 1. It is better to use pure sine wave power inverter to connect with the TV, not modified power inverter. 2. It is better not use our power inverter connect with the fluorescent (lamp). There are two kinds of fluorescent, one is inductance type: when turnon switch, the light can on after one second or more and some also with buzz, this light has instant high voltage and it is more than 700v and even more than 1000v; another one is electronic type, it also has instant current and can be more than 700 Ah. It only can use our power inverter to run the bulk. 3. if want to run the machine like washing machine ,refrigerator or water pump, coffee grinder or kettle which have a motor ,then need to use more than 15 times to 20. times power of them, because they all have instantaneous power when turn on. (Note: if your appliance is 1000W, then the battery need 1000W/12V=83A*3times=250A)