Coal Tar Epoxy is a two-part high solids epoxy, containing coal tar for the protection of substrates exposed to a corrosive atmosphere.

It may be used to repair leaking pipes where corrosive materials are present.

It is typically used to coat storage tanks, pipelines, steel and concrete bridge structures or in marine applications along the waterline or tidal zone where salt corrosion is prevalent.

This product also has outstanding abrasion resistance.

Application:

Surface to be coated should be clean and free of grease, wax or oil.

Mix two parts by volume of Part 1 and one part of Part 2 thoroughly.

Make sure Part 1 and Part 2 become a uniform color with no streaks; this will ensure a proper mix.

Coal Tar may be applied using a squeegee, brush, roller or other means to spread an even coat across the surface. Spraying is not recommended. Never thin with solvents or any other material.

• Great Chemical Resistance
• Great For Coating Rebar
• Coating of Storage Tanks, Pipelines, Styeel Boat Hulls, concrete Bridge Structures
• Coating is Resistant To Gasoline, Oil and Diesel Fuel
• Exhibits Outstanding Resistance To Abrasion And Immersion in Fresh or Saltwater

Dries black.