Select your model of Quickjack before purchase for correct hardware!
No plastic here! The EZ-Slide system is THE heavy duty complete kit of casters for your Quickjacks! Squeeze every ounce of usability out of your Quickjacks, while keeping them from damaging your floor and RUSTING!
No more grinding your Quickjacks into the pavement, concrete, or beautiful epoxy floor! Simply bolt this superior mobility kit onto your Quickjacks in a matter of minutes and wheel them into place under your car! Your spine and floors will thank you!
Crafted from 8-gauge steel, heavy duty 2" composite casters, 1/2" steel axles and stainless steel hardware, EZ-Slide is built to withstand the use and abuse! Designed with soft edges to avoid ankle injuries! Built here in the Midwest USA!
Included in this FULL EZ-Slide kit:
8-Caster Brackets
8-Heavy Duty 2" Composite Casters
8-Axle centering Bushings
8-Nylon Lock Nuts
8-Large Washers
8-Small Washers
4-1/2" Steel Axles
THE MAGIC OF MW CONCEPTS EZ-SLIDE CASTER KIT:
As your Quickjacks raise, these casters lift off of the ground, firmly planting your Quickjacks onto the floor just as usual and are perfectly safe, as long as you are using your Quickjack to its' manufacturer's specifications! The casters only contact the floor when the Quickjacks are in their fully collapsed position, so they can be maneuvered around your shop safely!
NOTE: This caster kit raises the Quickjacks from the floor approx 1/2"-3/4" depending on model. If your vehicle is extremely low, please measure! also note, Quickjacks from the manufacturer require a bit of space between the vehicle and the jack so they can start raising before having load added to them.
Quickjack LLC is a company owned by Bendpak Inc. MW Concepts LLC has no affiliation with Bendpak Inc. or Quickjack LLC.
No more grinding your Quickjacks into the pavement, concrete, or beautiful epoxy floor! Simply bolt this superior mobility kit onto your Quickjacks in a matter of minutes and wheel them into place under your car! Your spine and floors will thank you!
Crafted from 8-gauge steel, heavy duty 2" composite casters, 1/2" steel axles and stainless steel hardware, EZ-Slide is built to withstand the use and abuse! Designed with soft edges to avoid ankle injuries! Built here in the Midwest USA!
Included in this FULL EZ-Slide kit:
8-Caster Brackets
8-Heavy Duty 2" Composite Casters
8-Axle centering Bushings
8-Nylon Lock Nuts
8-Large Washers
8-Small Washers
4-1/2" Steel Axles
THE MAGIC OF MW CONCEPTS EZ-SLIDE CASTER KIT:
As your Quickjacks raise, these casters lift off of the ground, firmly planting your Quickjacks onto the floor just as usual and are perfectly safe, as long as you are using your Quickjack to its' manufacturer's specifications! The casters only contact the floor when the Quickjacks are in their fully collapsed position, so they can be maneuvered around your shop safely!
NOTE: This caster kit raises the Quickjacks from the floor approx 1/2"-3/4" depending on model. If your vehicle is extremely low, please measure! also note, Quickjacks from the manufacturer require a bit of space between the vehicle and the jack so they can start raising before having load added to them.
Quickjack LLC is a company owned by Bendpak Inc. MW Concepts LLC has no affiliation with Bendpak Inc. or Quickjack LLC.