DESCRIPTION
Empty Blanks are used with sharpening stones on Hapstone knife sharpener.
Edge Pro sharpening stones are fragile and need to be attached to Empty Blanks.
This adds rigidity and increases the lifespan of the stones.
Empty Blanks have a standard 45-degree bevel and are made of high-quality 3 mm thick aluminum.
Standard 160 x 25 x 3 mm
(6 ⅓" x 1" x ⅛") Working area 152 x 25 mm
(6" x 1") For stones up to 25 mm (1") wide
Narrow 160 x 12 x 3 mm
(6 ⅓" x ½" x ⅛") Working area 152 x 12 mm
(6" x ½") For stones up to 12 mm (½") wide
How to use
There are two ways to attach sharpening stones to empty blanks:
- Water-resistant glue with high adhesion to metals and stones. We recommend 3M 77 spray glue. If you have oilstone, use 3M 80 instead.
- Water-resistant PSA tape with high adhesion to metal and stone. We recommend 3M 90080.
Avoid cyanoacrylate and dual-component epoxy adhesives.
| Standard |
|---|
| 160 x 25 x 3 mm (6 ⅓" x 1" x ⅛") |
| Working area 152 x 25 mm (6" x 1") |
| For stones up to 25 mm (1") wide |
| Narrow |
|---|
| 160 x 12 x 3 mm (6 ⅓" x ½" x ⅛") |
| Working area 152 x 12 mm (6" x ½") |
| For stones up to 12 mm (½") wide |
How to use
There are two ways to attach sharpening stones to empty blanks:
- Water-resistant glue with high adhesion to metals and stones. We recommend 3M 77 spray glue. If you have oilstone, use 3M 80 instead.
- Water-resistant PSA tape with high adhesion to metal and stone. We recommend 3M 90080.
Avoid cyanoacrylate and dual-component epoxy adhesives.