Electric Concrete Vibrator Concrete Vibrabrater with 5 FT Copper Shaft 1300W

DESCRIPTION:

concrete vibrator is ideal for construction, patching and other repair jobs With an impressive vibration frequency of over 13,000 VPM, it removes air bubbles and helps concrete settle faster.The lightweight and compact design is ideal for consistent use.

FEATURES:

【Powerfull and Efficient】This Concrete Vibrator with 1300 Watt motor，13,000 VPM ,4800rpm, Applicable to consolidate cement and remove all the trapped air bubbles to give you the toughest cement. The vibrating rod is made of 65 mm manganese steel tape and double steel wire braided hose, not easy to break and more durable. The head of the vibrating rod is quenched with high hardness and large amplitude.

【Easy to use】The concrete vibrabrater Carry with lightweight and ergonomic handle design, with rubber patch, good grip, better control of the machine when workingis ideal for consistent use; Press the power switch, and then press the interlock switch to keep the machine running for a long time, reduce work intensity and relieve finger fatigue.

【Durable and Safe】This motor adopts high quality enamelled copper wire, More Stable and Longer Service Life. Thickened and strengthened cast aluminum casing, equiped with high-strength silicon steel sheet, and secondary quenching gear,Strong and durable. Enlarge the air outlet and adopt a porous heat dissipation design, ensures that the motor can dissipate heat for a long time, prevent burns and extend the life of the motor.

【Lengthened Vibrator】Long Work Area 5 ft. long Copper shaft for easy use and long reach,enlarge your work range.

【Widely Applicable】Ideal Concrete Vibrating Tool for patching, construction, cement pillar and grape rack pouring, construction of highway, fence and personal project.

OPERATING STEPS:

1. Take out the shaft and motor

2. Insert the shaft of the motor into the connect Shaft

3. Tighten it according to the direction of the thread

4. Knock the vibrating bar on the ground several times

PACKAGE INCLUDE:

1 × Concrete Vibrator

1 × 2m Copper Shaft Rod

1 × User Manual

2 × Carbon Brush

WARM TIPS:

1. After the power is turned on, if the concrete vibrator does not produce vibration, you can generally knock the end of the concrete vibrating rod to the ground, and after the vibrator makes a smooth and powerful chirping sound, you can carry out the pounding operation.

2. When the concrete vibrator works, the concrete vibrator should be inserted into the concrete vertically or at an angle, after vibrating for a certain period of time, the concrete vibrator should be pumped up and down when vibrating.

3. The vibrating rod should not be bent more than 50MM.

4. After working continuously for half an hour, the vibrating rod should stop for a while to prevent the machinery from heating up too much and damaging the machine parts.

5. After using for a period of time, the vibrating rod should be checked to see if the threaded connection of the rod head is loose to prevent the mortar water from penetrating into the rod, causing the vibrating rod not to vibrate.

NOTE: 

Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Please allow slight dimension difference due to different manual measurement. Thank you for your understanding.