Description
High-quality tool, high-quality life. This electric bee shaker is made of stainless steel and plastic, with a pure copper motor and a no-load speed of 0-2700r/min, making it a durable and efficient tool. With it, your work can be easier.
Application
It can be widely used in farms, pastures, residential areas, commercial venues, construction sites, and other areas to remove bee spleen.
How to Use
- Install the battery.
- Hold (lifting spleen clamp) clamp the nest spleen, grasp (clamping switch) clamp, and lift the nest spleen.
- Press the power switch with the thumb, and the machine will shake gently to complete the operation.
Specification
Main Material: Stainless Steel, Copper, Plastic
Surface Treatment: Galvanizing Process
Color: Black and Red
Type: US Standard
Assembly Required: No
Product Model: YKDF2000-W
Charger Model: SL-OXCO1
Input: AC 100-240V 50/60Hz
Output: DC 21V 1300mA
Power: 150W
Battery Type: 2* 2000mAh Lithium Batteries(Included)
Voltage: 20V
No-load Speed: 0-2700r/min
Clamping Range: Width: 25-30mm/0.98-1.18inch, Thickness: ≤22mm/0.87inch
Number of Speed Gears: 4
Gross Weight: 4kg/8.82lbs
Storage Case Size: 38*34*11cm/14.96*13.38*4.33inch
Package Size: 38.5*35*11cm/15.16*13.8*4.33inch
Product Height: 32cm/13.6inch
Clip Length: 23cm/ 9.05inch
Top Length: 35cm/13.8inch
Package Included
1*Electric Bee Shaker
1*Charger
1*Storage Box
1*English Manual
2*2000mAh Lithium Batteries
Details
 |  |  |
| Heat Dissipation Holes: They can timely reduce the temperature of the product during operation, ensure safety, and extend its service life. | Enhanced Nest Base Lifting Clip: It meets the specifications of the upper beam of the nest frame. The enlarged opening angle, lengthened lower structure, and sawtooth design make this product clamp the spleen more firmly to prevent the spleen from falling. | Indicator Light&Display Screen: When fully charged, the indicator light is green. The display screen will display the percentage of battery power for you to check in a timely manner. |
Notes
- Please read the manual carefully and pay attention to the safety precautions inside. Maintenance should be carried out by professionals.
- Before installing or removing the battery pack, ensure that the switch of the machine is off. Hold the tool and battery pack tightly when installing or removing the battery pack. Otherwise, they may slip out of your hands, causing damage to tools and batteries, or even personal injury.
- When the machine is not in use, please fully charge the battery pack and store it in a dry place. Please do not operate at a low speed for a long time, or the machine will have an overheating reaction.
- Please do not use water or chemical cleaning agents to clean your power tools, just wipe them with a dry cloth. Tools should be stored in a dry environment and the motor vents should be kept clean. Try not to use in dusty environments.
- Please allow the slight color difference caused by the shooting light and the 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
