EC5 Jump Starter Cable with Battery Clamps - 12V Replacement Alligator Clips to

Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide
$13.99
Item model number
KC-20
Amperage
600 Amps
Manufacturer Part Number
KC-20
Item Weight
0.704 ounces
Voltage
12 Volts
Package Dimensions
9.57 x 6.46 x 1.1 inches
UPC
313026583557
condition
New
  • 【Replacement Jump Starter Cable】KUNCAN Battery jumper cable designed to serve as a jump starter replacement cable clamp set for most brands of 12V mini portable jump boxes. Compatible with most car mini jump portable starters, and mobile chargers to jump-start a dead or weak car battery.
  • 【Specifications】Wire: 10 AWG, OD 5.5mm, Jacket: Silicone Rubber. Connector: EC5 Female Plug. Compatible with most 12V battery booster jumper with EC5 male output.
  • 【High-Quality 】Strong alligator clamps with tinned copper material cable (better than pure copper), make sure great-quality and safety protection.
  • 【Eazy to Use】 ① - Connect the red battery clamp of the jumper cable to the vehicle's positive (+) battery and connect the black to the negative (-) pole; ② - Plug the cord of jumper cable into the jumper starter's socket; ③ - Start the car and remove the clamps.
  • 【PAY ATTENTION PLEASE】Do NOT reverse the operation sequence of the jump starter. Please be careful when using this product, this item can NOT be overloaded, check your device power before using, please. Do remove the product from the vehicle within 30 seconds after the vehicle is started, or it may cause security incidents. Note: Please check your power bank if it can support your car.

Product Description

KUNCAN 12V Replacement Alligator Clips to EC5 Connector Car Jump Start Cable


KUNCAN Brand: Established in 2005, KUNCAN is a leading designer, manufacturer and supplier of the high-quality products. We provide cable solution for customers in USA, Euro, Asia and so on.

KUNCAN Quality: We insist on using pure copper as cable conductor and RoHS material. We keep developing new product to meet customer's increasing demand.

KUNCAN Promise: 24 hours passionate replication √; 30 days freely return and exchange √

Any questions, please feel free to let me know.

KUNCAN EC5 Jump Starter Cable with Battery Clamps - 12V Replacement Alligator Clips to EC5 Connector for Emergency Portable Car Battery Booster Cable

This Battery jumper cable is designed to serve as a jump starter replacement cable clamp set for most brands of 12V mini portable jump boxes. Ideal for jump-starting a dead or weak car battery.

  • Connector A: Strong Alligator Clamp Clip
  • Connector B: EC5 Female Plug (Fit for most car jump portable starters with EC5 male port)
  • Wire Guage: 10 AWG
  • Conductor: Tinned copper (Better than pure copper)
  • Total length: about 37cm
  • Input: 12V
  • Operating temperature: 0 ℃- 60 ℃
  • Support up to 20000mAh Power bank at 600Amp Current (<3 seconds)

Durable Full Copper Clamps

ABS plastic thickened and long protective cover with metal hardware Alligator Clamps. Red/black insulated exterior ensures quick visual identification for easy set-up.

EC5 Adapter & Match Perfectly

The connecting part has been molded to prevent the plug from disparting due to repeated plugging and unplugging. Standard EC5 Female Plug is compatible with most car mini jump portable starters, and mobile chargers to jump-start a dead or weak car battery.

10AWG Tinned Copper with Sillicon Insulation

Tinned copper is primarily used for protection against oxidation and corrosion. At high temperatures, the corrosion resistance of copper declines. Corrosive copper wire is less efficient at moving electricity and can cause safety hazards. The tin coat is valuable for protecting the wire in this state. Tinned copper can last up to 10 times longer than bare copper but has the same conductivity.

Usage of Car Jump Starter:

1. Connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the negative pole.

2. Plug the cord of the jumper cable into the jumper starter's socket.

3. Start the vehicle.

Cautions:

1. Do not reverse the operation sequence of the jump starter.

2. Do not use jump starter to start the vehicle if the number of battery indicators is less than 3 to protect the jump starter from damage.

3. Do remove the product from the vehicle within 30 seconds after the vehicle starts, or it may cause security incidents.

4. Please be careful when using this product, this item can NOT be overloaded. Please check your device's power before using it.

5. Note: Please check your power bank if it can support your car.